| 数据搜索系统,热门电子元器件搜索 |
|
ASL5015FHN 数据表(PDF) 50 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
ASL5015FHN 数据表(HTML) 50 Page - NXP Semiconductors |
|
50 / 69 page ![]() NXP Semiconductors ASL5xxxyHz Matrix LED Controller (MLC) ASL5xxxyHz All information provided in this document is subject to legal disclaimers. © NXP B.V. 2019. All rights reserved. Product data sheet Rev. 2.1 — 5 February 2019 50 / 69 Symbol Parameter/Pin Conditions Min Max Unit ASL5x15yHz –0.3 1.5 A IT(RMS) Maximum RMS current per switch ASL5x08yHz –0.15 0.8 A VCP CP pin With respect to Ground –0.2 72 V VVMAX VMAX pin With respect to ground –0.2 60 V VTXD Pin TXD With respect to ground –0.2 6 V VRXD Pin RXD With respect to ground –0.2 6 V VNTC Pin NTC With respect to ground –0.2 1.95 V VID Pin ID With respect to ground –0.2 1.95 V VAx Pins A0 to A4 With respect to ground –0.2 6 V VVcc Pin VCC With respect to ground –0.2 6 V VICP Pin ICP Not ground but must be connected to ground –0.2 1.95 V Tj Junction temperature — –40 175 °C Tstg Storage temperature — –55 175 °C TMTP MTP programming ambient temperature MLC in MTP programming mode 0 40 °C Ncy(W)MTP Maximum MTP programming times — Programming temperature between 0 and 40 °C — 200 cycles HBM (at any pins)[1] –2 2 KV CDM[2] –500 500 V Electrostatic discharge voltage (Component level) CDM Corner pins[3] –750 750 V ISO10605 SWx, and VCC pins with respect to GND and 270nF/50V capacitor attached to the pin. ID and NTC pins with respect to GND and 10nF capacitor + 3.3 V diode attached to the pin –8 8 KV Vact(ov)ESD System Level[4][5] IEC61000-4-2 SWx, and VCC pins with respect to GND and 270nF/50V capacitor attached to the pin. ID and NTC pins with respect to GND and 10nF capacitor + 3.3 V diode attached to the pin -6 6 KV [1] Human Body Model (HBM): according to AEC-Q100-002 (100 pF, 1.5 KΩ). [2] Charged Device Model (CDM): according to AEC-Q100-011 (field Induced charge; 4 pF). [3] Only applicable for part numbers with HLQFP package. [4] System level test at any pin that can be connected directly to ECU connector (IEC61000-4-2 & ISO10605). Switches pins and Vcc pin. Model for IEC61000-4-2: 330 Ω / 150 pF. Model for ISO10605: 2 kΩ / 150 pF (unpowered) [5] System level test board reference schematic can be found in the application notes |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |