| 数据搜索系统,热门电子元器件搜索 |
|
STM32F373VC 数据表(PDF) 61 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F373VC 数据表(HTML) 61 Page - STMicroelectronics |
|
61 / 137 page ![]() DocID022691 Rev 7 61/137 STM32F373xx Electrical characteristics 114 6.3.5 Supply current characteristics The current consumption is a function of several parameters and factors such as the operating voltage, ambient temperature, I/O pin loading, device software configuration, operating frequencies, I/O pin switching rate, program location in memory and executed binary code. The current consumption is measured as described in Figure 10: Current consumption measurement scheme. All Run-mode current consumption measurements given in this section are performed with a reduced code that gives a consumption equivalent to CoreMark code. Typical and maximum current consumption The MCU is placed under the following conditions: • All I/O pins are in input mode with a static value at VDD or VSS (no load) • All peripherals are disabled except when explicitly mentioned • The Flash memory access time is adjusted to the fHCLK frequency (0 wait state from 0 to 24 MHz, 1 wait state from 24 to 48 MHz and 2 wait states from 48 MHz to 72 MHz) • Prefetch in ON (reminder: this bit must be set before clock setting and bus prescaling) • When the peripherals are enabled fAPB1 = fAHB/2 , fAPB2 = fAHB • When fHCLK > 8 MHz PLL is ON and PLL inputs is equal to HSI/2 = 4 MHz (if internal clock is used) or HSE = 8 MHz (if HSE bypass mode is used) The parameters given in Table 28 to Table 34 are derived from tests performed under ambient temperature and supply voltage conditions summarized in Table 22. Table 28. Typical and maximum current consumption from VDD supply at VDD = 3.6 V(1) Symbol Parameter Conditions fHCLK All peripherals enabled All peripherals disabled Unit Typ Max @ TA(2) Typ Max @ TA(2) 25 °C 85 °C 105 °C 25 °C 85 °C 105 °C IDD Supply current in Run mode, code executing from Flash HSE bypass, PLL on 72 MHz 63.1 70.7 71.5 73.4 29.2 31.1 31.7 34.2 mA 64 MHz 56.3 63.3 64.1 64.9 26.1 27.8 28.4 30.4 48 MHz 42.5 48.5 48.0 50.1 19.9 22.6 21.9 23.1 32 MHz 28.8 31.4 32.2 34.3 13.1 16.1 14.9 16.2 24 MHz 21.9 24.4 24.4 25.8 10.1 10.9 11.9 12.4 HSE bypass, PLL off 8 MHz 7.3 8.0 9.3 9.3 3.7 4.1 4.4 5.0 1 MHz 1.1 1.5 1.8 2.3 0.8 1.1 1.4 1.9 HSI clock, PLL on 64 MHz 51.7 57.7 58.0 60.4 25.8 27.6 28.1 30.1 48 MHz 38.6 45.9 43.5 46.9 19.8 21.9 21.7 22.8 32 MHz 26.4 31.1 29.7 31.9 13.1 15.7 14.8 16.2 24 MHz 20.3 22.6 22.6 23.7 6.9 7.5 8.1 8.8 HSI clock, PLL off 8 MHz 7.0 7.6 8.8 8.8 3.7 4.1 4.4 5.0 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |