ADE7912/ADE7913

Data Sheet

Rev. C | Page 10 of 41

ABSOLUTE MAXIMUM RATINGS

Table 6.

Parameter

Rating

VDD to GND

−0.3 V to +3.7 V

V1P, V2P, VM

−2 V to +2 V

−0.3 V to VDD + 0.3 V

Digital Input Voltage to GND

−0.3 V to VDD + 0.3 V

Digital Output Voltage to GND

−0.3 V to VDD + 0.3 V

−100 kV/µs to

+100 kV/µs

Operating Temperature

Industrial Range

−40°C to +85°C

Storage Temperature Range

−65°C to +150°C

260°C

1

Refers to common-mode transients across the insulation barrier. Common-

mode transients exceeding the absolute maximum ratings may cause latch-

up or permanent damage.

2

Analog Devices recommends that reflow profiles used in soldering RoHS

compliant devices conform to J-STD-020D.1 from JEDEC. Refer to JEDEC for

the latest revision of this standard.

Stresses at or above those listed under Absolute Maximum

Ratings may cause permanent damage to the product. This is a

stress rating only; functional operation of the product at these

or any other conditions above those indicated in the operational

section of this specification is not implied. Operation beyond

the maximum operating conditions for extended periods may

affect product reliability.

THERMAL RESISTANCE

device soldered in a circuit board for surface-mount packages.

Table 7. Thermal Resistance

Package Type

Unit

20-Lead SOIC_IC

48.0

6.2

°C/W

ESD CAUTION

Parameter

Max

Unit

AC Voltage, Bipolar Waveform

400

V rms

DC Voltage, Basic Insulation

1173

V peak

1

Refers to the continuous voltage magnitude imposed across the isolation barrier. See the Insulation Lifetime section for more details.

Note that greater working voltages than the values presented in Table 8 shorten the lifetime of the product (see the Insulation Lifetime

section). Therefore, although some certifications in Table 2 state bigger maximum working voltages, use the ADE7912/ADE7913 only for

working voltages lower than the values presented in this Table 8.