ADE9430 datasheet(9/35 Pages) AD

9 / 35 page

Data Sheet

ADE9430

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 9 of 35

TA = 25°C, unless otherwise noted.

Table 3.

Parameter

Rating

VDD to GND

−0.3 V to +3.96 V

Analog Input Voltage to GND, IAP, IAN, IBP, IBN, ICP,

ICN, INP, INN, VAP, VAN, VBP, VBN, VCP, VCN

−2 V to +2 V

Reference Input Voltage to REFGND

−0.3 V to +2 V

Digital Input Voltage to GND

−0.3 V to VDD + 0.3 V

Digital Output Voltage to GND

−0.3 V to VDD + 0.3 V

Operating Temperature

Industrial Range

−40°C to +85°C

Storage Range

−65°C to +150°C

Junction

125°C

Lead (Soldering, 10 sec)1

260°C

1 Analog Devices recommends that reflow profiles used in soldering RoHS

compliant devices conform to J-STD-020D.1 from JEDEC. Refer to JEDEC for

the latest revision of this standard.

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Careful attention to PCB

thermal design is required.

θJA and θJC are specified for the worst case conditions, that is, a

device soldered in a circuit board for surface-mount packages.

Table 4. Thermal Resistance

Package Type

θJA

θJC

Unit

CP-40-71

27.14

3.13

°C/W

1 The junction to air measurement uses a 2S2P JEDEC test board with 4 × 4

standard JEDEC vias. The junction to case measurement uses a 1S0P JEDEC

test board with 4 × 4 standard JEDEC vias. See JEDEC standard JESD51-2.

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in and ESD-protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001-2012.

Field induced charged-device model (FICDM) per JESD22-C101E.

Machine model (MM) per ANSI/ESD STMD5.2 MM ratings are for

characterization only.

ESD Ratings for the ADE9430

Table 5. ADE9430, 40-Lead LFCSP

ESD Model1

Withstand Threshold

Class

HBM

3.75 kV

FICDM

1.25 kV

300 V

Not applicable

1 Analog Devices recommends that reflow profiles used in soldering RoHS

compliant devices conform to J-STD-020D.1 from JEDEC. Refer to JEDEC for

the latest revision of this standard.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.

ADE9430 数据表(PDF) 9 Page - Analog Devices

ADE9430 数据表(HTML) 9 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

数据表下载