PCF2103EUSLASH2SLASHF2 datasheet(22/56 Pages) PHILIPS

22 / 56 page

1998 May 11

Philips Semiconductors

Product speciﬁcation

LCD controllers/drivers

PCF2103 family

Fig.13 Example of busy flag checking timing sequence.

MGA806

instruction

write

busy flag

check

busy flag

check

busy flag

check

instruction

write

internal operation

internal

DB7

R/W

data

busy

not

busy

data

8.1

Clear display

‘Clear display’ writes character code 20H into all DDRAM

addresses (the character pattern for character code 20H

must be a blank pattern), sets the DDRAM address

counter to logic 0 and returns display to its original position

if it was shifted. Thus, the display disappears and the

cursor or blink position goes to the left edge of the display.

Sets entry mode I/D = 1 (increment mode). S of entry

mode does not change.

The instruction ‘clear display’ requires extra execution

time. This may be allowed by checking the Busy Flag (BF)

or by waiting until the 165 clock cycles have elapsed.

The latter must be applied where no read-back options are

foreseen, as in some Chip-On-Glass (COG) applications.

8.2

Return home

‘Return home’ sets the DDRAM address counter to logic 0

and returns display to its original position if it was shifted.

DDRAM contents do not change. The cursor or blink

position goes to the left of the first display line. I/D and S of

entry mode do not change.

8.3

Entry mode set

8.3.1

I/D

When I/D = 1 (0) the DDRAM or CGRAM address

increments (decrements) by 1 when data is written into or

read from the DDRAM or CGRAM. The cursor or blink

position moves to the right when incremented and to the

left when decremented. The cursor underline and cursor

character blink are inhibited when the CGRAM is

accessed.

8.3.2

When S = 1, the entire display shifts either to the right

(I/D = 0) or to the left (I/D = 1) during a DDRAM write. Thus

it looks as if the cursor stands still and the display moves.

The display does not shift when reading from the DDRAM,

or when writing into or reading out of the CGRAM. When

S = 0 the display does not shift.

PCF2103EU/2/F2 数据表(PDF) 22 Page - NXP Semiconductors

PCF2103EU/2/F2 数据表(HTML) 22 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

数据表下载

链接网址

PCF2103EU/2/F2 数据表(PDF) 22 Page - NXP Semiconductors

PCF2103EU/2/F2 数据表(HTML) 22 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

数据表 下载

链接网址

数据表下载