| 数据搜索系统,热门电子元器件搜索 |
|
PCF5083H/F2 数据表(PDF) 67 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
PCF5083H/F2 数据表(HTML) 67 Page - NXP Semiconductors |
|
67 / 136 page ![]() 1996 Oct 29 67 Philips Semiconductors Objective specification GSM signal processing IC PCF5083 CM_convert_TCHFS_data This routine is used for the TCH/FS loop-back. It converts the output data of CM_decoder_TCHFS into a format which is required for CM_encoder_TCHS. If bfi_sig_flag is set to logic 1, then the decoded speech parameters are set to zero if a bad frame has been detected. 7 bfi_sig_flag − CM_decoder_CCH Channel decoder for control channels. In accordance with “GSM Rec. 05.03” this procedure can be used for the following channels: BCCH: Broadcast Control Channel PCH: Paging Channel SACCH: Slow Associated Control Channel AGCH: Access Grant Channel SDCCH: Stand-alone Dedicated Control Channel. The four bursts containing CCH information which are stored in CCH_CMI_BUFF are decoded rxqual_ber reflects the estimated bit error rate at the input of the channel decoder (hard decision assumed) multiplied by 4096. bfi_cch bad frame indication: bfi_cch = 0; the decoded CCH message is OK bfi_cch = 1; a parity error has been detected bfi_cch = 2; a bad metric error has been detected bfi_cch = 3; both parity and bad metric errors have been detected. cch_msg[12] contains the CCH message consisting of 184 bits. The bits are stored in a packed format with 16-bits per word and LSB first order. Unused MSBs are set to zero. 8 − rxqual_ber bfi_cch cch_msg[12] CM_decoder_SCH Channel decoder synchronization channel. bfi_sch is the bad frame indication: bfi_sch = 0; the decoded SCH message is OK bfi_sch = 1; a parity error has been detected bfi_sch = 2; a bad metric error has been detected bfi_sch = 3; both parity and bad metric errors have been detected. sch_msg[2] contains the decoded SCH message consisting of 25 bits. The bits are stored in a packed format with 16-bits per word and LSB first order. Unused bits are set to zero. 9 − bfi_sch sch_msg[2] DESCRIPTION ID PARAMETERS RETURN VALUES |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |