| 数据搜索系统,热门电子元器件搜索 |
|
4LS5K 数据表(PDF) 57 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
4LS5K 数据表(HTML) 57 Page - OSRAM GmbH |
|
57 / 115 page ![]() Document Feedback 4LS Digital Interface Datasheet • PUBLIC DS000542 • v3-01 • 2022-Nov-17 114 │ 56 To use the interface, first the N_CS signal should go low, then the word should be sent synchronous with the SCLK. The data is captured at the MOSI input with the rising edge of SCLK and is sent out on the MISO output on the falling edge of SCLK. The updating of registers on the sensor can be made using three different methods: update request, immediate update and force update. The update request and immediate update are both set by register 0x01 using the bits 3:0. When update request is set, the read/write operation from shadow memory to effective is only performed with falling edge of LVAL signal. In the case of immediate update the read/write operation from shadow memory to effective is performed immediately, independently if the sensor is performing integration, A/D conversion or readout. The Force Update1 method is similar to the immediate update, but is given as an external signal (pulse with 2 x TMCLK minimum). Force Update updates the register values in the moment that pulse is applied. Therefore, when using Force Update signal, please make sure that LVAL is low, avoiding defect lines. 8.2.2 Writing Operation The writing operation is performed by sending the word containing the data and the address and no acknowledge signal or indication is given back. It can be performed continuously. When writing to the registers, the last word to be sent to the register has to be always the update request or immediate update or force update (STS1Reg – 0x01), otherwise the write is not performed. After the last word of data is sent to SPI interface, the SCLK should be maintained during 4 x TSCLK. Figure 81 exemplifies how to perform the operation over the interface. Figure 81: Write Cycle Over SPI Interface Figure 82 exemplifies a cycle of multiple writing operations. 1 Despite the fact Force Update works properly, Immediate and Update Request are the recommended ones. D7 D6 D5 D4 D3 D2 D1 D0 A7 A6 A5 A4 A3 A2 A1 A0 4 x TSCLK N_CS SCLK SCLK MOSI 4 x TSCLK |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |