4LS5K datasheet(61/115 Pages) OSRAM

61 / 115 page

Document Feedback

4LS

Datasheet

• PUBLIC

DS000542

• v3-01 • 2022-Nov-17

114

│ 60

The registers are responsible for the static control of the CIS. They are used to set operating values

and define states/modes for the sensor. They can also be used to test the sensor, for instance, set

dedicated values to the LVDS outputs. Section 9.1 shows the default register setting.

9.1

Detailed Register Description

9.1.1

Chip Revision Register (Address 0x00)

Figure 90:

CRReg

Address: 0x00

Default Value: 0x02

Access: Read Only

Bit

Bit Name

Default

Bit Description

0:7

Revision(1)

00000010b

CIS chip revision

(1)

The content of this register can only be modified by metal mask redesign.

9.1.2

Status 1 Register (Address 0x01)

Figure 91:

STS1Reg

Address: 0x01

Default Value: 0x85

Access: Read/Write

Bit

Bit Name

Default

Bit Description

7:7

ROI(1)

When set to '1' the ROI is active.

6:6

Anti-corona

When set to '1' enables the anti-corona

circuitry.

5:5

Companding Mode

When set to '1' enables the A/D conversion

to companding mode.

4LS5K 数据表(PDF) 61 Page - OSRAM GmbH

4LS5K 数据表(HTML) 61 Page - OSRAM GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载