TUSB1310

www.ti.com

SLLSE16C – DECEMBER 2009 – REVISED AUGUST 2010

USB 3.0 Transceiver

Check for Samples: TUSB1310

1

PRODUCT OVERVIEW

1.1

Features

1

• Universal Serial Bus (USB)

– Single Port 5.0-Gbps USB 3.0 Physical Layer Transceiver

•

One 5.0-Gbps SuperSpeed Conneciton

•

One 480-Mbps HS/FS/LS Connection

– Fully Compliant with USB 3.0 Specification

– Supports 3+ Meters USB 3.0 Cable Length

– Fully Adaptive Equalizer to Optimize Receiver Sensitivity

– PIPE to Link Layer Controller

•

Supports 16-Bit SDR Mode at 250 MHz

•

Compliant With PHY Interface for the USB Architectures (PIPE), Version 3.0

– ULPI to Link Layer Controller

•

Supports 8-Bit SDR Mode at 60 MHz

•

Supports Synchronous Mode and Low Power Mode

•

Compliant with UTMI+ Low Pin Interface (ULPI) Specification, Revision 1.1

• General Features

– IEEE 1149.1 JTAG Support

– IEEE 1149.6 JTAG support for the SuperSpeed Port

– Operates on a Single Reference Clock Selectable from 20, 25, 30 or 40 MHz

– 3.3-, 1.8-, and 1.1-V Supply Voltages

– 1.8-V PIPE and ULPI I/O

– Available in Lead-Free 175-Ball 12- x 12-nF BGA Package (175ZAY)

1.2

Target Applications

• Surveillance Cameras

• Multimedia Handset

• Smartphone

• Digital Still Camera

• Portable Media Player

• Personal Navigation Device

• Audio Dock

• Video IP Phone

• Wireless IP Phone

• Software Defined Radio

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Copyright © 2009–2010, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.