AD6622

–7–

REV. 0

ABSOLUTE MAXIMUM RATINGS

*

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +3.6 V

Input Voltage . . . . –0.3 V to VDD +0.3 V (Not 5 V Tolerant)

IN[17:0], QIN, OEN

Input Voltage . . . . . . . . . . . . . –0.3 V to +3.6 V (5 V Tolerant)

CLK,

RESET, DS, R/W, MODE, A[2:0], D[7:0], SYNC, TRST,

TCK, TMS, TDI, SDINA, SDINB, SDINC, SDIND

Output Voltage Swing . . . . . . . . . . . . –0.3 V to VDD + 0.3 V

Load Capacitance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 pF

Junction Temperature Under Bias . . . . . . . . . . . . . . . . . 125

°C

Storage Temperature Range . . . . . . . . . . . . –65

°C to +150°C

Lead Temperature (5 sec) . . . . . . . . . . . . . . . . . . . . . . . 280

°C

*Stresses greater than those listed above may cause permanent damage to the

device. These are stress ratings only; functional operation of the devices at these

or any other conditions greater than those indicated in the operational sections of

this specification is not implied. Exposure to absolute maximum rating conditions

for extended periods may affect device reliability.

THERMAL CHARACTERISTICS

128-Lead MQFP:

θ

°C/W, No Airflow

θ

°C/W

Thermal measurements made in the horizontal position on a

2-layer board.

EXPLANATION OF TEST LEVELS

I.

100% Production Tested.

II.

100% Production Tested at 25

°C, and Sample Tested at

Specified Temperatures.

III. Sample Tested Only.

IV. Parameter Guaranteed by Design and Analysis.

V.

Parameter is Typical Value Only.

VI. 100% Production Tested at 25

°C, and Sample Tested at

Temperature Extremes.

ORDERING GUIDE

Model

Temperature Range

Package Description

Package Option

AD6622AS

–40

°C to +70°C (Ambient)

128-Lead MQFP (Metric Quad Flatpack)

S-128A

AD6622S/PCB

Evaluation Board with AD6622 and Software

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although

the AD6622 features proprietary ESD protection circuitry, permanent damage may occur on

devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are

recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE