| 数据搜索系统,热门电子元器件搜索 |
|
CS8416-CS 数据表(PDF) 29 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS8416-CS 数据表(HTML) 29 Page - Cirrus Logic |
|
29 / 48 page ![]() CS8416 DS578PP2 29 8.7 Receiver Error Mask (06h) The bits in this register serve as masks for the corresponding bits of the Receiver Error Register. If a mask bit is set to 1, the error is unmasked, meaning that its occurrence will appear in the receiver error register, will affect the RERR pin, will affect the RERR interrupt, and will affect the current audio sample according to the status of the HOLD bit. If a mask bit is set to 0, the error is masked, meaning that its occurrence will not appear in the receiver error register, will not affect the RERR pin, will not affect the RERR interrupt, and will not affect the current audio sample. The CCRC and QCRC bits behave differently from the other bits: they do not affect the current audio sample even when un- masked. This register defaults to 00h. 8.8 Interrupt Mask (07h) The bits of this register serve as a mask for the Interrupt Status register.Ifa mask bitisset to 1, the error is unmasked, meaning that its occurrence will affect the INT pin and the status register. If a mask bit is set to 0, the error is masked, meaning that its occurrence will not affect the internal INT signal or the status register. The bit positions align with the corresponding bits in Interrupt Status register. This register defaults to 00h. The INT signal may be selected to appear on the GPO pins. 8.9 Interrupt Mode MSB (08h) and Interrupt Mode LSB(09h) The two Interrupt Mode registers form a 2-bit code for each Interrupt Status register function. There are three ways to set the INT pin active in accordance with the interrupt condition. In the Rising edge active mode, the INT pin becomes active on the arrival of the interrupt condition. In the Falling edge active mode, the INT pin becomes active on the removal of the interrupt condition. In Level active mode, the INT interrupt pin becomes active during the interrupt condition. Be aware that the active level(Active High or Low) only depends on the INT[1:0] bits. These registers default to 00h. 00 - Rising edge active 01 - Falling edge active 10 - Level active 11 - Reserved 76 5432 10 0 QCRCM CCRCM UNLOCKM VM CONFM BIPM PARM 76 5432 10 0 PCCHM OSLIPM DETCM CCHM RERRM QCHM FCHM 76 5432 10 0 PCCH1 OSLIP1 DETC1 CCH1 RERR1 QCH1 FCH1 0 PCCH0 OSLIP0 DETC0 CCH0 RERR0 QCH0 FCH0 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |