ST7FOXU0 datasheet(97/123 Pages) STMICROELECTRONICS

97 / 123 page

ST7FOXU0

Electrical characteristics

97/123

12.4

Supply current characteristics

The following current consumption specified for the ST7 functional operating modes over

temperature range does not take into account the clock source current consumption. To get

the total device consumption, the two current values must be added (except for Halt mode

for which the clock is stopped).

12.4.1

Supply current

TA = -40 to +85 °C unless otherwise specified.

Table 45.

Supply current characteristics

Symbol

Parameter

Conditions

Typ

Max

Unit

IDD

Supply current in Run mode(1)

fCPU = 4 MHz

2.5

4.5(2)

fCPU = 8 MHz

5.0

Supply current in Wait mode(3)

fCPU = 4 MHz

1.1

2(2)

fCPU = 8 MHz

3.5

Supply current in Slow mode(4)

fCPU/32 = 250 kHz

550

950

µA

Supply current in Slow-Wait mode(5)

fCPU/32 = 250 kHz

450

750

Supply current in AWUFH mode(6)(7)

100(2)

Supply current in Active Halt mode

120

250

Supply current in Halt mode(8)

TA = 85 °C

0.5

CPU running with memory access, all I/O pins in input mode with a static value at VDD or VSS (no load), all peripherals in

reset state; clock input (CLKIN) driven by external square wave, LVD disabled.

Data based on characterization, not tested in production.

All I/O pins in input mode with a static value at VDD or VSS (no load), all peripherals in reset state; clock input (CLKIN)

driven by external square wave, LVD disabled.

Slow mode selected with fCPU based on fOSC divided by 32. All I/O pins in input mode with a static value at VDD or VSS (no

load), all peripherals in reset state; clock input (CLKIN) driven by external square wave, LVD disabled.

Slow-Wait mode selected with fCPU based on fOSC divided by 32. All I/O pins in input mode with a static value at VDD or

VSS (no load), all peripherals in reset state; clock input (CLKIN) driven by external square wave, LVD disabled.

All I/O pins in input mode with a static value at VDD or VSS (no load). Data tested in production at VDD max. and fCPU max.

This consumption refers to the Halt period only and not the associated run period which is software dependent.

All I/O pins in output mode with a static value at VSS (no load), LVD disabled. Data based on characterization results,

tested in production at VDD max and fCPU max.

ST7FOXU0 数据表(PDF) 97 Page - STMicroelectronics

ST7FOXU0 数据表(HTML) 97 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载