ATPL230A datasheet(56/122 Pages) ATMEL

56 / 122 page

ATPL230A [DATASHEET]

Atmel-43053J-ATPL230A-Datasheet_22-Sep-16

9.3

PHY Layer Registers

9.3.1

PHY Configuration Registers

9.3.1.1 PHY Layer Special Function Register

Name:

PHY_SFR

Address:

0xFE2A

Access:

Read/Write

Reset:

0x87

• BCH_ERR: Busy Channel Error Flag

This bit is cleared to ‘0’ by hardware to indicate the presence of an OFDM signal at the transmission instant.

Otherwise, this field value is ‘1’.

This bit is used for returning a result of “Busy Channel” in the PHY_DATA confirm primitive (see PRIME

specification).

• CD: Carrier Detect bit

This bit is set to ‘1’ by hardware when an OFDM signal is detected, and it is active during the whole recep-

tion.

This bit is used in channel access (CSMA-CA algorithm) for performing channel-sensing.

• UMD: Unsupported Modulation Scheme flag

This flag is set to ‘1’ by hardware every time a header with correct CRC is received, but the PROTOCOL field

in this header indicates a modulation scheme not supported by the system.

• INT_PHY: Physical Layer interruption

This bit is internally connected to the EINT pin.

It is Low level active and it is set to '0' by the PHY layer to trigger an interrupt in the external host.

In reception, every time a PLC message is received, the PHY layer generates two interrupts. One of

them when the physical header is correctly received (two first symbols), and the other one when the

message is completely received.

In transmission, an interrupt will be generated every time a complete message has been sent.

The signal is cleared by writing '1' in the bit PHY_SFR(0).

76543210

BCH_ERR

UMD

INT_PHY

ATPL230A 数据表(PDF) 56 Page - ATMEL Corporation

ATPL230A 数据表(HTML) 56 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载