ATPL230A datasheet(90/122 Pages) ATMEL

90 / 122 page

ATPL230A [DATASHEET]

Atmel-43053J-ATPL230A-Datasheet_22-Sep-16

Name:

TXRXBUF_TXCONF_TX1

Address:

0xFD3D

Access:

Read/Write

Reset:

0xA0

• TRS1: TxRx established by software in buffer 1.

TxRx established by software for activated/deactivated TXRX

signal before/after each transmission to work properly transistors when this feature has been selected.

0: Disabled

1: Enabled

• ATR1: TxRx control mode in buffer 1.

Establishing software/hardware control of TXRX signal for transmitting.

1: by hardware

0: by software

• FE1: Transmission forced/unforced in buffer 1.

When force transmission is required, if it is possible (Carrier

Detection or Reception are in course and not disable) and suitable buffer is enabled, a transmission is immediately

started.

0: Transmission unforced

1: Transmission forced

• EB1: Buffer 0 enabled/disabled in buffer 1.

Enable buffer that it has been required.

0: Disabled

1: Enabled

• DC1: Carrier Detect enabled/disabled for transmission in buffer 1.

Starting transmission though carrier

detection is in course.

0: Enabled

1: Disabled

• DR1: Reception enabled/disabled for transmission in buffer 1.

Starting transmission though reception is in

course.

0: Enabled

1: Disabled

76543210

TRS1

ATR1

FE1

EB1

DC1

DR1

ATPL230A 数据表(PDF) 90 Page - ATMEL Corporation

ATPL230A 数据表(HTML) 90 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载