DA6503.005

14 December 2016

34 (34)

ORDERING INFORMATION

Product Code

Product

Description

MAS6503CA1WAD00

Piezoresistive Sensor

Signal Interface IC

EWS-tested wafer, thickness 370 µm.

MAS6503CA1WAB05

Piezoresistive Sensor

Signal Interface IC

Dies on waffle pack, thickness 180 µm

MAS6503CA1Q1706

Piezoresistive Sensor

Signal Interface IC

QFN-16 4x4x0.75, Pb-free, RoHS compliant, Tape &

Reel, 1000/3000 pcs components on reel

Contact Micro Analog Systems Oy for other wafer and die thickness options.

LOCAL DISTRIBUTOR

MICRO ANALOG SYSTEMS OY CONTACTS

Micro Analog Systems Oy

Kutomotie 16

FI-00380 Helsinki, FINLAND

Tel. +358 10 835 1100

Fax +358 10 835 1109

http://www.mas-oy.com

NOTICE

Micro Analog Systems Oy (MAS) reserves the right to make changes to the products contained in this data sheet in order to improve the

design or performance and to supply the best possible products. MAS assumes no responsibility for the use of any circuits shown in this

data sheet, conveys no license under any patent or other rights unless otherwise specified in this data sheet, and makes no claim that the

circuits are free from patent infringement. Applications for any devices shown in this data sheet are for illustration only and MAS makes no

claim or warranty that such applications will be suitable for the use specified without further testing or modification.

MAS products are not authorized for use in safety-critical applications (such as life support) where a failure of the MAS product would

reasonably be expected to cause severe personal injury or death. Buyers represent that they have all necessary expertise in the safety and

regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-

related requirements concerning their products and any use of MAS products in such safety-critical applications, notwithstanding any

applications-related information or support that may be provided by MAS. Further, Buyers must fully indemnify MAS and its representatives

against any damages arising out of the use of MAS products in such safety-critical applications.

MAS products are neither designed nor intended for use in military/aerospace applications or environments. Buyers acknowledge and agree

that any such use of MAS products which MAS has not designated as military-grade is solely at the Buyer's risk, and that they are solely

responsible for compliance with all legal and regulatory requirements in connection with such use.

MAS products are neither designed nor intended for use in automotive applications or environments. Buyers acknowledge and agree that, if

they use any non-designated products in automotive applications, MAS will not be responsible for any failure to meet such requirements.