 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
DVR 数据表(PDF) 299 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
DVR 数据表(HTML) 299 Page - Microchip Technology |
|
|
299 / 416 page  2016-2018 Microchip Technology Inc. DS30010118D-page 299 PIC24FJ256GA705 FAMILY REGISTER 24-5: AD1CON5: A/D CONTROL REGISTER 5 R/W-0 R/W-0 R/W-0 R/W-0 U-0 U-0 R/W-0 R/W-0 ASEN LPEN CTMREQ BGREQ — — ASINT1 ASINT0 bit 15 bit 8 U-0 U-0 U-0 U-0 R/W-0 R/W-0 R/W-0 R/W-0 — — — — WM1 WM0 CM1 CM0 bit 7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 15 ASEN: Auto-Scan Enable bit 1 = Auto-scan is enabled 0 = Auto-scan is disabled bit 14 LPEN: Low-Power Enable bit 1 = Low power is enabled after scan 0 = Full power is enabled after scan bit 13 CTMREQ: CTMU Request bit 1 = CTMU is enabled when the A/D is enabled and active 0 = CTMU is not enabled by the A/D bit 12 BGREQ: Band Gap Request bit 1 = Band gap is enabled when the A/D is enabled and active 0 = Band gap is not enabled by the A/D bit 11-10 Unimplemented: Read as ‘0’ bit 9-8 ASINT<1:0>: Auto-Scan (Threshold Detect) Interrupt Mode bits 11 = Interrupt after Threshold Detect sequence has completed and valid compare has occurred 10 = Interrupt after valid compare has occurred 01 = Interrupt after Threshold Detect sequence has completed 00 = No interrupt bit 7-4 Unimplemented: Read as ‘0’ bit 3-2 WM<1:0>: Write Mode bits 11 = Reserved 10 = Auto-compare only (conversion results are not saved, but interrupts are generated when a valid match occurs, as defined by the CMx and ASINTx bits) 01 = Convert and save (conversion results are saved to locations as determined by the register bits when a match occurs, as defined by the CMx bits) 00 = Legacy operation (conversion data is saved to a location determined by the Buffer register bits) bit 1-0 CM<1:0>: Compare Mode bits 11 = Outside Window mode: Valid match occurs if the conversion result is outside of the window defined by the corresponding buffer pair 10 = Inside Window mode: Valid match occurs if the conversion result is inside the window defined by the corresponding buffer pair 01 = Greater Than mode: Valid match occurs if the result is greater than the value in the corresponding Buffer register 00 = Less Than mode: Valid match occurs if the result is less than the value in the corresponding Buffer register |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
