Preliminary Technical Data

ADN2817/ADN2818

Rev.Pr A | Page 7 of 35

ABSOLUTE MAXIMUM RATINGS

μF, SLICEP = SLICEN = VEE, unless otherwise noted.

Table 4.

Parameter

Rating

Supply Voltage (VCC)

4.2 V

Minimum Input Voltage (All Inputs)

VEE − 0.4 V

Maximum Input Voltage (All Inputs)

VCC + 0.4 V

Maximum Junction Temperature

125°C

Storage Temperature

−65°C to +150°C

Lead Temperature (Soldering 10 s)

300°C

Stress above those listed under Absolute Maximum Ratings may

cause permanent damage to the device. This is a stress rating

only and functional operation of the device at these or any other

conditions above those indicated in the operational sections of

this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL CHARACTERISTICS

Thermal Resistance

32-LFCSP, 4-layer board with exposed paddle soldered to VEE

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.