| 数据搜索系统,热门电子元器件搜索 |
|
AD9923ABBCZ 数据表(PDF) 27 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9923ABBCZ 数据表(HTML) 27 Page - Analog Devices |
|
27 / 88 page ![]() AD9923A Rev. 0 | Page 27 of 88 Vertical Sequences (VSEQ) A vertical sequence (VSEQ) is created by selecting one of the V-pattern groups and adding repeats, a start position, and horizontal clamping and blanking information. Each VSEQ is programmed using the registers shown in Table 15. Figure 37 shows how each register is used to generate a V-sequence. The VPATSELA and VPATSELB registers select the V-pattern group that is used in a given V-sequence. Having two groups available allows each vertical output to be mapped to a different V-pattern group. The selected V-pattern group can have repetitions added for high speed line shifts or line binning by using the VREP registers for odd and even lines. Generally, the same number of repetitions is programmed into both registers. If a different number of repetitions is required on odd and even lines, separate values can be used for each register (see the Generating Line Alternation for V-Sequences and HBLK section). The VSTARTA and VSTARTB registers specify the pixel location where the V-pattern group starts. The VMASK register is used in conjunction with the FREEZE/RESUME registers to enable optional masking of the XV outputs. Either or both of the FREEZE1/RESUME1 and FREEZE2/RESUME2 registers can be enabled. The line length (in pixels) is programmable using the HDLEN registers. Each V-sequence can have a different line length to accommodate various image readout techniques. The maximum number of pixels per line is 8192. Note that the last line of the field can be programmed separately using the HDLAST register, located in the field register (see Table 16). VREP 3 HD XV1 TO XV13 PROGRAMMABLE SETTINGS FOR EACH VERTICAL SEQUENCE: 1START POSITION IN THE LINE OF SELECTED V-PATTERN GROUP. 2HD LINE LENGTH. 3V-PATTERN SELECT (VPATSEL) TO SELECT ANY V-PATTERN GROUP. 4NUMBER OF REPETITIONS OF THE V-PATTERN GROUP (IF NEEDED). 5START POLARITY AND TOGGLE POSITIONS FOR CLPOB AND PBLK SIGNALS. 6MASKING POLARITY AND TOGGLE POSITIONS FOR HBLK SIGNAL. V-PATTERN GROUP 1 3 CLPOB PBLK HBLK 2 44 VREP 2 5 6 Figure 37. V-Sequence Programmability |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |