 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ST72141K2 数据表(PDF) 9 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST72141K2 数据表(HTML) 9 Page - STMicroelectronics |
|
|
9 / 132 page  ST72141K 9/132 1.3 EXTERNAL CONNECTIONS The following figure shows the recommended ex- ternal connections for the device. The VPP pin is only used for programming OTP and EPROM devices and must be tied to ground in user mode. The 10 nF and 0.1 µF decoupling capacitors on the power supply lines are a suggested EMC per- formance/cost tradeoff. The external reset network is intended to protect the device against parasitic resets, especially in noisy environments. Unused I/Os should be tied high to avoid any un- necessary power consumption on floating lines. An alternative solution is to program the unused ports as inputs with pull-up. Figure 5. Recommended External Connections VPP VDD VSS OSC1 OSC2 RESET VDD 0.1µF + See Clocks Section VDD 0.1µF 0.1µF EXTERNAL RESET CIRCUIT Or configure unused I/O ports Unused I/O 10µF 4.7K 10K by software as input with pull-up VDD Detector (LVD) is used Optional if Low Voltage VDD VSS |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
