| 数据搜索系统,热门电子元器件搜索 |
|
ADM1029ARQZ-R7 数据表(PDF) 43 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
ADM1029ARQZ-R7 数据表(HTML) 43 Page - ON Semiconductor |
|
43 / 50 page ![]() Rev. 1 | Page 43 of 50 | www.onsemi.com ADM1029 Register 18h, 19h – Fan x * Fault Action (Power-On Default BFh) Bit Name R/W Description 0 Assert CFAULT on R/W If this bit is set, CFAULT will be asserted when there is a fault (Tach or Fault = 1 Pins 2/23) on Fan x *. 1 Assert INT on Fault = 1 R/W If this bit is set, INT will be asserted when there is a fault (Tach or Pins 2 23) on Fan x *. 2 Assert CFAULT on R/W If this bit is set, CFAULT will be asserted when there is a hot unplug event Hot Unplug = 1 on Fan x *. 3 Assert INT on R/W If this bit is set, INT will be asserted when there is a hot unplug event Hot Unplug = 1 on Fan x *. 4 Thermal Override in R/W If Bit 4 in Fan x * Status Register is set then Fan x* will go to Alarm Speed if Sleep = 1 an overtemperature event is detected as per settings in Temp x * Fault Action Registers, while this bit is set. 5 Drive Fault_ on R/W If Bit 3 or Bit 6 of Reg 10 is set, drive Pins 2, 23 low if a fault is generated. Fault_L = 1 6 Hot-Plug Speed on R/W When this bit is set, Fan x * will go to Hot-Plug Speed when CFAULT is CFAULT in = 0 pulled low externally. 7 Alarm on CFAULT = 1 R/W When this bit is set, Fan x * will go to Alarm Speed when CFAULT is pulled low externally. *“x” denotes the fan number. Register 18h is for Fan 1 and Register 19h is for Fan 2. Register 20h, 21h – Fan x * Event Mask (Power-On Default FFh) Bit Name R/W Description 0 Fan 1 = 1 R/W If a fault (Tach or Pins 2/23) is detected on Fan x *, Fan 1 will be driven to Alarm Speed when this bit is set. 1 Fan 2 = 1 R/W If a fault (Tach or Pins 2/23) is detected on Fan x *, Fan 2 will be driven to Alarm Speed when this bit is set. 2 Reserved R Unused. Will read back 1. 3 Reserved R Unused. Will read back 1. 4 Reserved R Unused. Will read back 1. 5 Reserved R Unused. Will read back 1. 6 Reserved R Unused. Will read back 1. 7 Reserved R Unused. Will read back 1. *“x” denotes the fan number. Register 20h is for Fan 1 and Register 21h is for Fan 2. Register 60h, 61h – Fan x * Minimum/Alarm Speed (Power-On Default FFh) Bit Name R/W Description 3–0 Fan x Minimum Speed R/W This nibble contains the Normal speed value for Fan x *. When in automatic fan this nibble will contain the minimum speed at which Fan x * will run. The power-up default for the Min Speed should be 5hex which corresponds to 33% PWM duty cycle. 7–4 Fan x Alarm Speed R/W This nibble contains the Alarm speed value for Fan x *. *“x” denotes the fan number. Register 60h is for FAN 1 and 61h is for FAN 2. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |