| 数据搜索系统,热门电子元器件搜索 |
|
GS9062-CFE3 数据表(PDF) 11 Page - Gennum Corporation |
|
|
|||||||||||||||||||||||||||||
GS9062-CFE3 数据表(HTML) 11 Page - Gennum Corporation |
|
11 / 46 page ![]() GS9062 Data Sheet 22209 - 7 February 2007 11 of 46 67 DETECT_TRS Non Synchronous Input CONTROL SIGNAL INPUT Signal levels are LVCMOS/LVTTL compatible. Used to select the timing mode of the device. When set HIGH, the device will lock the internal flywheel to the embedded TRS timing signals in the parallel input data. When set LOW, the device will lock the internal flywheel to the externally supplied H, V, and F input signals. 69 PCLK – Input PARALLEL DATA BUS CLOCK Signal levels are LVCMOS/LVTTL compatible. SD 20-bit mode PCLK = 13.5MHz SD 10-bit mode PCLK = 27MHz 72 LOCKED Synchronous with PCLK Output STATUS SIGNAL OUTPUT Signal levels are LVCMOS / LVTTL compatible. The LOCKED signal will be HIGH whenever the device has correctly received and locked to SMPTE compliant data in SMPTE mode or DVB-ASI compliant data in DVB-ASI mode. It will be LOW otherwise. 73, 74 VCO, VCO Analog Input Differential inputs for the external VCO reference signal. For single ended devices such as the GO1555/GO1525*, VCO should be AC coupled to VCO_GND. *For new designs use GO1555 75 VCO_GND – Output Power Ground reference for the external voltage controlled oscillator. Connect to pins 2, 4, 6, and 8 of the GO1555/GO1525*. This pin is an output. Should be isolated from all other grounds. *For new designs use GO1555 76 VCO_VCC – Output Power Power supply for the external voltage controlled oscillator. Connect to pin 5 of the GO1555/GO1525*. This pin is an output. Should be isolated from all other power supplies. *For new designs use GO1555 77 LF Analog Output Control voltage to external voltage controlled oscillator. Nominally +1.25V DC. 78 CP_CAP Analog Input PLL lock time constant capacitor connection. Normally connected to VCO_GND through 2.2nF. 79 LB_CONT Analog Input Control voltage to set the loop bandwidth of the integrated reclocker. 80 CP_GND – Power Ground connection for the charge pump. Connect to analog GND. Table 1-1: Pin Descriptions (Continued) Pin Number Name Timing Type Description |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |