| 数据搜索系统,热门电子元器件搜索 |
|
MMPF0100 数据表(PDF) 89 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MMPF0100 数据表(HTML) 89 Page - Freescale Semiconductor, Inc |
|
89 / 136 page ![]() Analog Integrated Circuit Device Data Freescale Semiconductor 89 PF0100 Functional Block Requirements and Behaviors Power Generation VGEN1 AC AND TRANSIENT PSRR(52) •IGEN1 = 75 mA, 20 Hz to 20 kHz VGEN1[3:0] = 0000 - 1101 VGEN1[3:0] = 1110, 1111 PSRRVGEN1 50 37 60 45 – – dB Output Noise Density VIN1 = 1.75 V, IGEN1 = 75 mA 100 Hz – <1.0 kHz 1.0 kHz – <10 kHz 10 kHz – 1.0 MHz NOISEVGEN1 – – – -108 -118 -124 -100 -108 -112 dBV/ √Hz Turn-on Slew Rate • 10% to 90% of end value •1.75 V ≤ VIN1 ≤ 3.4 V, IGEN1 = 0.0 mA VGEN1[3:0] = 0000 to 0111 VGEN1[3:0] = 1000 to 1111 SLWRVGEN1 – – – – 12.5 16.5 mV /μs Turn-On Time Enable to 90% of end value, VIN1 = 1.75 V, 3.4 V IGEN1 = 0.0 mA GEN1tON 60 – 500 μs Turn-Off Time Disable to 10% of initial value, VIN1 = 1.75 V IGEN1 = 0.0 mA GEN1tOFF –– 10 ms Start-Up Overshoot VIN1 = 1.75 V, 3.4 V, IGEN1 = 0.0 mA GEN1OSHT –1.0 2.0 % Transient Load Response •VIN1 = 1.75 V, 3.4 V IGEN1 = 10 to 100 mA in 1.0 μs. Peak of overshoot or undershoot of VGEN1 with respect to final value • Refer to Figure 24 VGEN1LOTR –– 3.0 % Transient Line Response •IGEN1 = 75 mA VIN1INITIAL = 1.75 V to VIN1FINAL = 2.25 V for VGEN1[3:0] = 0000 to 1101 VIN1INITIAL = VGEN1+0.3 V to VIN1FINAL = VGEN1+0.8 V for VGEN1[3:0] = 1110, 1111 • Refer to Figure 24 VGEN1LITR –5.0 8.0 mV Notes 52. The PSRR of the regulators is measured with the perturbing signal at the input of the regulator. The power management IC is supplied separately from the input of the regulator and does not contain the perturbed signal. During measurements, care must be taken not to operate in the dropout region of the regulator under test. Table 101. VGEN1 Electrical Characteristics All parameters are specified at TA = -40 to 85 °C, VIN = 3.6 V, VIN1 = 3.0 V, VGEN1[3:0] = 1111, IGEN1 = 10 mA, typical external component values, unless otherwise noted. Typical values are characterized at VIN = 3.6 V, IN1 = 3.0 V, VGEN1[3:0] = 1111, IGEN1 = 10 mA, and 25 °C, unless otherwise noted. Parameter Symbol Min Typ Max Unit |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |