| 数据搜索系统,热门电子元器件搜索 |
|
3G5A2-RPT01-PE 数据表(PDF) 84 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
3G5A2-RPT01-PE 数据表(HTML) 84 Page - Omron Electronics LLC |
|
84 / 182 page ![]() ! ! 71 Note The maximum life of the battery is 5 years, regardless of whether power is supplied to the CPU. The memory backup duration when power is not supplied to the CPU varies with the ambient temperature, and also depends on whether the Expansion DM Unit is mounted to the CPU (CV1000 only). Details of the minimum lifetime of the battery are provided in Appendix B Specifi - cations. 4-2 Memory Card Battery The RAM Memory Card is provided with a backup memory battery. When the Memory Card is mounted to the CPU and the battery life is close to expiring, the CPU ALARM indicator will blink, bit A42616 will turn ON, and the message “BATT LOW” will appear on the Programming Device. When this oc- curs, replace the battery within one week to avoid loss of data. The entire replacement must be completed within one minute to ensure that the data will not be lost. Caution Do not short circuit, charge, disassemble, or expose the battery to heat. The bat- tery fluid is flammable and if mishandled, may cause a fire or explosion. Do not incinerate the battery after use. Battery Replacement Battery case Slot Caution Steps 4 through 7 of the following procedure must be completed within 1 minute. If the new battery is not inserted within one minute, the contents of memory will be lost. 1, 2, 3... 1. If the Memory Card (M/C) indicator is not lit, press the Memory Card power supply switch to turn on power to the Memory Card and leave it on for at least 10 seconds. 2. Press the Memory Card power supply switch to turn off the Memory Card indicator. 3. Press the Memory Card eject button and remove the Memory Card. 4. Release the battery case by inserting the tip of a pen (or similar object) in the slot on the side of the Memory Card as shown. 5. Remove the old battery from the case. 6. Install the new battery as shown, with the positive terminal to the top. Battery Battery case 7. Insert the battery case back into the Memory Card. Be sure that the case is installed all the way in. Memory Card Battery Section 4-2 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |