3G5A2-RPT01-PE datasheet(15/182 Pages) OMRON

15 / 182 page

1-1

Control Systems

A Control System is the electronic equipment needed to control a particular pro-

cess. It may include everything from a process control computer, to the factory

computer, down through the PCs, and then on down through the network to the

I/O devices: control components like the switches, stepping motors, solenoids,

and sensors which monitor and control mechanical operations.

PCs

Process Control Computer

Factory Computer

I/O devices

A Control System can involve very large applications where many different mod-

els of PC are networked together or it could be an application as small as a single

PC controlling a number of output devices.

1-2

The Role of the PC

The PC is the part of the Control System that directly controls the manufacturing

process. According to the program stored in its memory, the PC accepts data

from the input devices connected to it and uses this data to monitor the con-

trolled system. When the program calls for some action to take place, the PC

sends data to the output devices connected to it to cause that action to take

place. The PC may be used to control a simple, repetitive task, or it may be con-

nected to other PCs or to a host computer in order to integrate the control of a

complex process.

The Role of the PC

Section 1-2

3G5A2-RPT01-PE 数据表(PDF) 15 Page - Omron Electronics LLC