 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
3G5A2-RPT01-PE 数据表(PDF) 86 Page - Omron Electronics LLC |
|
|
|||||||||||||||||||||||||||||
3G5A2-RPT01-PE 数据表(HTML) 86 Page - Omron Electronics LLC |
|
|
86 / 182 page  73 2. Detach the terminal block from the Output Unit, by removing the screws lo- cated at the top and bottom of the terminal block. Mounting screws Located at the top and bottom. Terminal block mounting screws Located at the top and bottom of the terminal block. Cover mounting screws (8) 3. Remove the screws that mount the Output Unit to the Backplane. Pulling the Unit toward you, remove the Output Unit from the Backplane. 4. There are eight screws on each side of the Output Unit. Remove these screws to detach the case from the cover. 5. Pull out the printed circuit board. 6. Use the Relay Puller to pull out the Relay. Insert a new Relay. 7. Reassemble the Unit. Note To remove the relay, use the P6B-Y1 Relay Puller. Be sure to insert the relay in the socket in the correct direction. The relay cannot be inserted in the wrong di- rection and if excessive force is applied to the relay, the pins of the relay may bend. The locations of relays on the PC boards are illustrated in the following figures. 3G2A5-OC221/223 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Indicators Output Unit Relays Section 4-4 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
