ST802RT1AFR datasheet(34/58 Pages) STMICROELECTRONICS

34 / 58 page

Registers and descriptors description

ST802RT1A, ST802RT1B

34/58

Doc ID 17049 Rev 1

MDIX status: This bit indicates whether MDI or MDIX is in use.

MDIX swap: Setting this bit forces the device to MDIX. When this bit is 0, the MDIX status is

determined by auto-negotiation if auto-MDIX is enabled.

MDIX disable: Setting this bit disables auto-detection and negotiation of MDIX. Clearing this

bit enables auto-MDIX.

Table 27.

RN1C [0d28, 0x1C]: 10Base-T error and general status register

Bit

Bit name

Description

Default

Type

15:14

RESERVED

---

MDIX Status

1 -> MDI-X configuration used

0 -> MDI configuration used

0RO

MDIX Swap

1 -> MDIX force (if not in fx_mode)

0 -> Normal operation

0RW

MDIX Disable

1 -> MDIX auto-detection and negotiation disabled

0 -> MDI-MDIX auto-detection enabled

1RW

RESERVED

---

P(LH)

Jabber detect

1 -> Jabber condition detected

0 -> No jabber condition detected.

Set at jabber condition detection, cleared only after register read

(if no more jabber condition is present). Fixed to 0 in 100Base-X

modes. Same as RN01[1] and RN19[0]

0RO

Polarity

Changed

1 -> Polarity changed event

0 -> No polarity changes

0RO

7:0

RESERVED

---

001001

11b

ST802RT1AFR 数据表(PDF) 34 Page - STMicroelectronics

ST802RT1AFR 数据表(HTML) 34 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

数据表下载

链接网址

ST802RT1AFR 数据表(PDF) 34 Page - STMicroelectronics

ST802RT1AFR 数据表(HTML) 34 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

数据表 下载

链接网址

数据表下载