| 数据搜索系统,热门电子元器件搜索 |
|
TAS5731MPHPR 数据表(PDF) 53 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TAS5731MPHPR 数据表(HTML) 53 Page - Texas Instruments |
|
53 / 81 page ![]() TAS5731M www.ti.com SLOS838C – JULY 2013 – REVISED AUGUST 2015 9.6.14 Oscillator Trim Register (0x1B) The TAS5731M PWM processor contains an internal oscillator to support autodetect of I2S clock rates. This reduces system cost because an external reference is not required. Currently, TI recommends a reference resistor value of 18.2 k Ω (1%). This must be connected between OSC_RES and DVSSO. Writing 0x00 to register 0x1B enables the trim that was programmed at the factory. NOTE Trim must always be run following reset of the device. Table 17. Oscillator Trim Register (0x1B) D7 D6 D5 D4 D3 D2 D1 D0 FUNCTION 0 – – – – – – – Reserved(1) – 0 – – – – – – Oscillator trim not done (read-only) (1) – 1 – – – – – – Oscillator trim done (read only) – – 0 0 0 0 – – Reserved(1) – – – – – – 0 – Select factory trim (Write a 0 to select factory trim; default is 1.) – – – – – – 1 – Factory trim disabled(1) – – – – – – – 0 Reserved(1) (1) Default values are in bold. 9.6.15 BKND_ERR Register (0x1C) When a back-end error signal is received from the internal power stage, the power stage is reset stopping all PWM activity. Subsequently, the modulator waits approximately for the time listed in Table 18 before attempting to re-start the power stage. Table 18. BKND_ERR Register (0x1C)(1) D7 D6 D5 D4 D3 D2 D1 D0 FUNCTION 0 0 0 0 0 0 0 X Reserved – – – – 0 0 1 0 Set back-end reset period to 299 ms(2) – – – – 0 0 1 1 Set back-end reset period to 449 ms – – – – 0 1 0 0 Set back-end reset period to 598 ms – – – – 0 1 0 1 Set back-end reset period to 748 ms – – – – 0 1 1 0 Set back-end reset period to 898 ms – – – – 0 1 1 1 Set back-end reset period to 1047 ms – – – – 1 0 0 0 Set back-end reset period to 1197 ms – – – – 1 0 0 1 Set back-end reset period to 1346 ms – – – – 1 0 1 X Set back-end reset period to 1496 ms – – – – 1 1 X X Set back-end reset period to 1496 ms (1) This register can be written only with a "non-Reserved" value. Also this register can be written once after the reset. (2) Default values are in bold. Copyright © 2013–2015, Texas Instruments Incorporated Submit Documentation Feedback 53 Product Folder Links: TAS5731M |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |