| 数据搜索系统,热门电子元器件搜索 |
|
MEC1322 数据表(PDF) 75 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MEC1322 数据表(HTML) 75 Page - Microchip Technology |
|
75 / 456 page ![]() 2014 - 2015 Microchip Technology Inc. DS00001719D-page 75 MEC1322 5.0 LPC INTERFACE 5.1 Introduction The Intel® Low Pin Count (LPC) Interface is the LPC Interface used by the system host to configure the chip and com- municate with the logical devices implemented in the design through a series of read/write registers. Register access is accomplished through the LPC transfer cycles defined in Table 5-8, "LPC Cycle Types Supported". The Logical Devices implemented in the design are identified in Table 5-16, “I/O Base Address Registers,” on page 92. The Base Address Registers allow any logical device’s runtime registers to be relocated in LPC I/O space. All chip con- figuration registers for the device are accessed indirectly through the LPC I/O Configuration Port (see Section 5.8.3, "Configuration Port," on page 83). LPC memory cycles may also be used to access the Base Address Registers of certain devices. 5.2 References • Intel® Low Pin Count (LPC) Interface Specification, v1.1 • PCI Local Bus Specification, Rev. 2.2 • Serial IRQ Specification for PCI Systems Version 6.0. • PCI Mobile Design Guide Rev 1.0 5.3 Terminology This table defines specialized terms localized to this feature. TABLE 5-1: TERMINOLOGY Term Definition System Host Refers to the external CPU that communicates with this device via the LPC Interface. Logical Devices Logical Devices are LPC accessible features that are allocated a Base Address and range in LPC I/O address space Runtime Register Runtime Registers are register that are directly I/O accessible by the System Host via the LPC interface. These registers are defined in Section 5.10, "Runtime Registers," on page 93. Configuration Registers Registers that are only accessible in CONFIG_MODE. These registers are defined in Section 5.9, "LPC Configuration Registers," on page 88. EC_Only Registers Registers that are not accessible by the System Host. They are only accessible by an internal embedded controller. These registers are defined in Section 5.11, "EC-Only Registers," on page 94. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |