| 数据搜索系统,热门电子元器件搜索 |
|
TVP7002IPZP 数据表(PDF) 44 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
TVP7002IPZP 数据表(HTML) 44 Page - Texas Instruments |
|
44 / 58 page ![]() TVP7002 SLES206C – MAY 2007 – REVISED APRIL 2013 www.ti.com ADC Setup Subaddress 2Ch (Default 50h) 7 6 5 4 3 2 1 0 ADC bias control [3:0] Trim clamp [3:0] ADC bias control [3:0]: Allows adjusting the internal ADC bias current for optimum performance. 0h = Minimum setting 5h = Recommended setting for sample rates ≤ 110 MSPS (default) 8h = Recommended setting for sample rates > 110 MSPS Fh = Maximum setting Trim clamp [3:0]: SOG coarse clamp bias current control. 0h = 2 μA (default) 3h = 8 μA Fh = 32 μA IBIAS = 2 + 2 × NBIAS, where 0 ≤ NBIAS ≤ 15 The SOG coarse clamp leakage current (subaddress 30h) is derived from the SOG coarse clamp bias current. Coarse Clamp Control Subaddress 2Dh Default (00h) 7 6 5 4 3 2 1 0 CCCLP_cur_CH1 [1:0] Reserved [5:3] Coarse B Coarse G Coarse R CCCLP_cur_CH1 [1:0]: Coarse clamp charge current switch selection. 00 = Highest charge current setting (default) 11 = Lowest charge current setting Reserved [5:3]: 000 = Normal operation (default) Coarse B: Active-high coarse clamp enable for Blue channel 0 = Blue channel coarse clamp disabled (default) 1 = Blue channel coarse clamp enabled Coarse G: Active-high coarse clamp enable for Green channel 0 = Green channel coarse clamp disabled (default) 1 = Green channel coarse clamp enabled Coarse R: Active-high coarse clamp enable for Red channel 0 = Red channel coarse clamp disabled (default) 1 = Red channel coarse clamp enabled NOTE: Enabling Coarse clamps will disable Fine clamps and override Fine clamp enable settings in subaddress 2Ah. SOG Clamp Subaddress 2Eh (Default 80h) 7 6 5 4 3 2 1 0 SOG_CE CCCLP_cur_SOG [1:0] upi_sog dwni_sog upi_ch123 [2:0] SOG_CE: Active-high SOG clamp enable. 0 = SOG clamp disabled 1 = SOG clamp enabled (default) CCCLP_cur_SOG [1:0]: SOG coarse clamp charge current switch selection. 00 = Lowest charge current setting (default) 11 = Highest charge current setting Reserved [4:0]: 0 = Normal operation (default) 44 Submit Documentation Feedback Copyright © 2007–2013, Texas Instruments Incorporated Product Folder Links: TVP7002 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |