STM8TL52X4 datasheet(13/84 Pages) STMICROELECTRONICS

13 / 84 page

DocID022344 Rev 7

13/84

STM8TL52x4 STM8TL53x4

Product overview

3.2

Development tools

Development tools for the STM8 microcontrollers include:



The ST-Link very low-cost professional tool to debug and program



The STVD high-level language debugger including C compiler, assembler and

integrated development environment



The STVP Flash programming software



The STM-STUDIO real-time and non-intrusive graphical interface used to probe

application variables and data

The STM8 also comes with starter kits, evaluation boards and low-cost in-circuit

debugging/programming tools.

3.3

Single wire data interface (SWIM) and debug module

The debug module with its single wire data interface (SWIM) permits non-intrusive real-time

in-circuit debugging and fast memory programming.

The Single wire interface is used for direct access to the debugging module and memory

programming. The interface can be activated in all device operation modes.

The non-intrusive debugging module features a performance close to a full-featured

emulator. Beside memory and peripherals, also CPU operation can be monitored in real-

time by means of shadow registers.

3.4

Interrupt controller

The STM8TL5xx4 devices feature a nested vectored interrupt controller:



Nested interrupts with 3 software priority levels



22 interrupt vectors with hardware priority



Up to 22 external interrupt sources on 10 vectors



TRAP and RESET interrupts

3.5

Memory

The STM8TL5xx4 devices have the following main features:



4 Kbyte of RAM



The EEPROM is divided into two memory arrays (see the STM8TL5xxx reference

manual (RM0312) for details on the memory mapping):

–

16 Kbyte of low-density embedded Flash program including up to 2 Kbyte of data

EEPROM. Data EEPROM and Flash program areas can be write protected

independently by using the memory access security mechanism (MASS).

–

64 option bytes (one block) of which 5 bytes are already used for the device.

–

Error correction code is implemented on the EEPROM.

STM8TL52X4 数据表(PDF) 13 Page - STMicroelectronics

STM8TL52X4 数据表(HTML) 13 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

数据表下载