STM32L162VC datasheet(68/123 Pages) STMICROELECTRONICS

68 / 123 page

Electrical characteristics

STM32L162VC, STM32L162RC

68/123

DocID022881 Rev 10

Low-speed external user clock generated from an external source

The characteristics given in the following table result from tests performed using a low-

speed external clock source, and under the conditions summarized in Table 14.

Figure 13. Low-speed external clock source AC timing diagram

High-speed external clock generated from a crystal/ceramic resonator

The high-speed external (HSE) clock can be supplied with a 1 to 24 MHz crystal/ceramic

resonator oscillator. All the information given in this paragraph are based on

characterization results obtained with typical external components specified in Table 29. In

the application, the resonator and the load capacitors have to be placed as close as

possible to the oscillator pins in order to minimize output distortion and startup stabilization

time. Refer to the crystal resonator manufacturer for more details on the resonator

characteristics (frequency, package, accuracy).

Table 28. Low-speed external user clock characteristics(1)

1. Guaranteed by design.

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

fLSE_ext

User external clock source

frequency

32.768

1000

kHz

VLSEH

OSC32_IN input pin high level

voltage

0.7VDD

-VDD

VLSEL

OSC32_IN input pin low level

voltage

VSS

-0.3VDD

tw(LSEH)

tw(LSEL)

OSC32_IN high or low time

465

tr(LSE)

tf(LSE)

OSC32_IN rise or fall time

CIN(LSE) OSC32_IN input capacitance

0.6

STM32L162VC 数据表(PDF) 68 Page - STMicroelectronics

STM32L162VC 数据表(HTML) 68 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载