ST6380 datasheet(24/82 Pages) STMICROELECTRONICS

24 / 82 page

24/82

ST6380, ST6381, ST6382, ST6383, ST6388, ST6389

3.5 INTERRUPT

The ST638x Core can manage 4 different maska-

ble interrupt sources, plus one non-maskable in-

terrupt source (top priority level interrupt). Each

source is associated with a particular interrupt vec-

tor that contains a Jump instruction to the related

interrupt service routine. Each vector is located in

the Program Space at a particular address (see

Table 7). When a source provides an interrupt re-

quest, and the request processing is also enabled

by the ST638x Core, then the PC register is load-

ed with the address of the interrupt vector (i.e. of

the Jump instruction). Finally, the PC is loaded

with the address of the Jump instruction and the

interrupt routine is processed.

The relationship between vector and source and

the associated priority is hardware fixed for the dif-

ferent ST638x devices. For some interrupt sourc-

es it is also possible to select by software the kind

of event that will generate the interrupt.

All interrupts can be disabled by writing to the GEN

bit (global interrupt enable) of the interrupt option

non maskable interrupt mode, so no interrupts will

be accepted and NMI flags will be used, until a

RETI instruction is executed. If an interrupt is exe-

cuted, one special cycle is made by the core, dur-

ing that the PC is set to the related interrupt vector

address. A jump instruction at this address has to

redirect program execution to the beginning of the

related interrupt routine. The interrupt detecting

cycle, also resets the related interrupt flag (not

available to the user), so that another interrupt can

be stored for this current vector, while its driver is

under execution.

If additional interrupts arrive from the same

source, they will be lost. NMI can interrupt other in-

terrupt routines at any time, while other interrupts

cannot interrupt each other. If more than one inter-

rupt is waiting for service, they are executed ac-

cording to their priority. The lower the number, the

higher the priority. Priority is, therefore, fixed. In-

terrupts are checked during the last cycle of an in-

struction (RETI included). Level sensitive inter-

rupts have to be valid during this period.

3.5.1 Interrupt Vectors/Sources

The ST638x Core includes 5 different interrupt

vectors in order to branch to 5 different interrupt

routines. The interrupt vectors are located in the

fixed (or static) page of the Program Space.

The interrupt vector associated with the non-

maskable interrupt source is named interrupt vec-

tor #0. It is located at the (FFCh,FFDh) addresses

in the Program Space. This vector is associated

with the PC6/IRIN pin.

The interrupt vectors located at addresses (FF6h,

FF7h), (FF4h, FF5h), (FF2h, FF3h), (FF0h, FF1h)

are named interrupt vectors #1, #2, #3 and #4 re-

spectively. These vectors are associated with TIM-

(#1),

VSYNC

(#2),

TIMER

(#3),

PC4(PWRIN) (#4) and ADC (#4).

Table 7. Interrupt Vectors/Sources

Relationships

Note 1. This pin is associated with the NMI Inter-

rupt Vector

3.5.2 Interrupt Priority

The non-maskable interrupt request has the high-

est priority and can interrupt any other interrupt

routines at any time, nevertheless the other inter-

rupts cannot interrupt each other. If more than one

interrupt request is pending, they are processed

by the ST638x Core according to their priority lev-

el: vector #1 has the higher priority while vector #4

the lower. The priority of each interrupt source is

hardware fixed.

Interrupt Source

Associated

Vector

Address

PC6/IRIN Pin

Interrupt

Vector # 0 (NMI)

0FFCh-0FFDh

Timer 2

Interrupt

Vector # 1

0FF6h-0FF7h

Vsync

Interrupt

Vector #2

0FF4h-0FF5h

Timer 1

Interrupt

Vector #3

0FF2h-0FF3h

PC4/PWRIN, ADC

Interrupt

Vector #4

0FF0h-0FF1h

ST6380 数据表(PDF) 24 Page - STMicroelectronics

ST6380 数据表(HTML) 24 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

数据表下载

链接网址

ST6380 数据表(PDF) 24 Page - STMicroelectronics

ST6380 数据表(HTML) 24 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

数据表 下载

链接网址

数据表下载