| 数据搜索系统,热门电子元器件搜索 |
|
MFC2000 数据表(PDF) 57 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
MFC2000 数据表(HTML) 57 Page - List of Unclassifed Manufacturers |
|
57 / 426 page ![]() Hardware Description MFC 2000 Multifunctional Peripheral Controller 2000 100723A Conexant 4-27 Table 4-5. Access Modes for Reading ROM ROM Access Mode Data Type Cache Memory Wait States Notes 8-bit non- interleave instruction Cache enabled and Cache miss w,w,w,w,w,w,w,w w,w,w,w,w,w,w,w (16 sequential accesses) This is cache burst access. Save the address decoding cycle for all accesses except the first access. 16-bit non- interleave instruction Cache enabled and Cache miss w,w,w,w,w,w,w,w (8 sequential accesses) This is cache burst access. Save the address decoding cycle for all accesses except the first access. 8-bit non- interleave instruction Cache disabled w If the sequential access occurs, save the address decoding cycle for all accesses except the first access. 16-bit non- interleave instruction Cache disabled w If the sequential access occurs, save the address decoding cycle for all accesses except the first access. 8-bit non- interleave data Not applied w If the sequential access occurs, save the address decoding cycle for all accesses except the first access. 16-bit non- interleave data Not applied w If the sequential access occurs, save the address decoding cycle for all accesses except the first access. 16-bit 2-way interleave instruction Cache enabled and Cache miss w, s, w-s-1, s, w-s-1, s, w-s-1, s (8 sequential accesses) This is cache burst access. 0 or 1 wait state is programmable and depends on the CPU clock frequency and the ROM speed. If ‘w-s-1’ is less than 1, it will be forced to 1. 16-bit 2-way interleave instruction Cache disabled w, s, w-s-1, s, w-s-1, s, w-s-1, s (one interleave access sequence) The actual sequential access length is dynamic. 0 or 1 wait state is programmable and depends on the CPU clock frequency and the ROM speed. If the starting address of the sequential access is not lined up with the octal address boundary of the interleave access, the partial interleave access sequence should be done. Then, restart the interleave access sequence at the octal address boundary of the interleave access. Even if the stopping address of the sequential access is not lined up with the octal address boundary of the interleave access, the access sequence must be stopped immediately at anywhere. If ‘w- s-1’ is less than s, it will be forced to s. 16-bit 2-way interleave data Cache enabled and Cache miss w, s, w-s-1, s, w-s-1, s, w-s-1, s (one interleave access sequence) The actual sequential access length is dynamic. 0 or 1 wait state is programmable and depends on the CPU clock frequency and the ROM speed. If the starting address of the sequential access is not lined up with the octal address boundary of the interleave access, the partial interleave access sequence should be done. Then, restart the interleave access sequence at the octal address boundary of the interleave access. Even if the stopping address of the sequential access is not lined up with the address boundary of the interleave access, the access sequence must be stopped immediately at anywhere. If ‘w- s-1’ is less than s, it will be forced to s. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |