| 数据搜索系统,热门电子元器件搜索 |
|
ADP5065ACBZ-1-R7 数据表(PDF) 29 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP5065ACBZ-1-R7 数据表(HTML) 29 Page - Analog Devices |
|
29 / 40 page ![]() Data Sheet ADP5065 Rev. D | Page 29 of 40 Bit No. Mnemonic Access Default Description [2:0] VWEAK[2:0] R/W 011 = 3.0 V Weak battery voltage rising threshold. 000 = 2.7 V. 001 = 2.8 V. 010 = 2.9 V. 011 = 3.0 V. 100 = 3.1 V. 101 = 3.2 V. 110 = 3.3 V. 111 = 3.4 V. Table 21. Timer Settings, Register Address 0x06 Bit Descriptions Bit No. Mnemonic Access Default Description [7:6] Not used 5 EN_TEND R/W 0 When low, this bit disables the charge complete timer (tEND), and a 31 ms deglitch timer remains on this function. 4 EN_CHG_TIMER R/W 1 When high, the trickle/fast charge timer is enabled. 3 CHG_TMR_PERIOD R/W 1 Trickle/fast charge timer period. 0 = 30 sec/300 minutes. 1 = 60 sec/600 minutes. 2 EN_WD R/W 0 When high, the watchdog timer safety timer is enabled. When low, the watchdog timer is disabled even when BAT_SNS exceeds VDEAD. 1 WD PERIOD R/W 0 Watchdog safety timer period. 0 = 32 sec/40 minutes. 1 = 64 sec/40 minutes. 0 RESET_WD W 0 High resets the watchdog safety timer. Bit is reset automatically. Table 22. Functional Settings1, Register Address 0x07 Bit Descriptions Bit No. Mnemonic Access Default Description 7 EN_JEITA R/W 0 When low, this bit disables the JEITA Li-Ion temperature battery charging specification. 6 DIS_IPK_SD R/W 1 When high, this bit disables the automatic shutdown of the device if four peak inductor current limits are reached in succession. In addition, when high, it only flags the Status Bit IPK_STAT. 5 EN_BMON R/W 0 When high, the battery monitor is enabled even when the voltage at the VINx pins is below VVIN_OK. 4 EN_THR R/W 0 When high, the THR current source is enabled even when the voltage at the VINx pins is below VVIN_OK. 3 Not used R/W 0 2 EN_EOC R/W 1 When high, end of charge is allowed. 1 EN_TRK R/W 1 When low, trickle charger is disabled and the dc-to-dc converter is enabled. 0 EN_CHG R/W 1 When low, the dc-to-dc converter is disabled. Table 23. Functional Settings2, Register Address 0x08 Bit Descriptions Bit No. Mnemonic Access Default Description [7:0] Not used R/W Table 24. Interrupt Enable, Register Address 0x09 Bit Descriptions Bit No. Mnemonic Access Default Description 7 EN_IND_PEAK_INT R/W 0 When high, the inductor peak current-limit interrupt is allowed. 6 EN_THERM_LIM_INT R/W 0 When high, the isothermal charging interrupt is allowed. 5 EN_WD_INT R/W 0 When high, the watchdog alarm interrupt is allowed. 4 EN_TSD_INT R/W 0 When high, the overtemperature interrupt is allowed. 3 EN_THR_INT R/W 0 When high, the THR temperature thresholds interrupt is allowed. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |