UCS2113 datasheet(27/62 Pages) MICROCHIP

27 / 62 page

 2016-2021 Microchip Technology Inc. and its subsidiaries

DS20005680B-page 27

UCS2113

If the RATION_EN control is set to ‘0’ prior to reaching

the charge rationing threshold, rationing will be

disabled and the Total Accumulated Charge registers

will be cleared. If the RATION_EN control is set to ‘0’

after the charge rationing threshold has been reached,

the following additional steps occur:

RATION status bit will be cleared.

The ALERT# pin will be released if asserted by

the rationing circuitry and no other conditions

are present.

The PWR_EN controls are checked to

determine the power state.

Setting

the

RATION_RST

control

‘1’ will

automatically reset the Total Accumulated Charge

registers to 00_00h. If this is done prior to reaching the

charge rationing threshold, the data will continue to be

accumulated restarting from 00_00h. If this is done

after the charge rationing threshold is reached, the

UCS2113 will take action as shown in Table 6-3.

Report

Ignore

Release ALERT# pin.

Report and

Disconnect

Open port power switch. See the Report and Disconnect (default) in Table 6-2.

Disconnect and

Go to Sleep

Release the ALERT# pin

Open the port power switch

Enter the Sleep state. See the Disconnect and Go to Sleep in Table 6-2.

Report and

Disconnect

Ignore

Release the ALERT# pin

Check the PWR_EN controls and enter the indicated power state if the

controls changed

Report

Check the PWR_EN controls and enter the indicated power state if the controls

changed

Disconnect and

Go to Sleep

Release the ALERT# pin

Enter the Sleep state. See the Disconnect and Go to Sleep in Table 6-2.

Disconnect

and Go to

Sleep

Ignore

Check the PWR_EN controls and enter the indicated power state if the controls

changed

Report

Assert the ALERT# pin

Check the PWR_EN controls and enter the indicated power state if the

controls changed

Report and

Disconnect

Assert the ALERT# pin

Check the PWR_EN controls to determine the power state, then enter that

state, except that the port power switch will not be closed

TABLE 6-4:

EFFECTS OF CHANGING RATIONING BEHAVIOR AFTER THRESHOLD REACHED

Behavior

New Behavior

Actions Taken

UCS2113 数据表(PDF) 27 Page - Microchip Technology

UCS2113 数据表(HTML) 27 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

数据表下载

链接网址

UCS2113 数据表(PDF) 27 Page - Microchip Technology

UCS2113 数据表(HTML) 27 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

数据表 下载

链接网址

数据表下载