| 数据搜索系统,热门电子元器件搜索 |
|
UCS2113 数据表(PDF) 7 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
UCS2113 数据表(HTML) 7 Page - Microchip Technology |
|
7 / 62 page ![]() 2016-2021 Microchip Technology Inc. and its subsidiaries DS20005680B-page 7 UCS2113 Auto-Recovery Mode Cycle Time tCYCLE — 25 — ms Time delay before error condition check. Programmable 15-50 ms, default listed Auto-Recovery Delay tTST — 20 — ms Portable device attached, VBUS must be > VTEST after this time. Programmable 10-25 ms, default listed Discharge Time tDISCHARGE — 200 — ms Amount of time discharge resistor applied. Programmable 100-400 ms, default listed Port Power Switch Operation With Trip Mode Current Limiting Region 2 Current Keep-Out IBUS_R2MIN_1 —— 0.1 A Note 2 Minimum VBUS Allowed at Output VBUS_MIN_1 2.0 — — V Note 2 Port Power Switch Operation With Constant Current Limiting (Variable Slope) Region 2 Current Keep-Out IBUS_R2MIN — — 2.13 A Note 2 Minimum VBUS Allowed at Output VBUS_MIN 2.0 — — V Note 2 Current Measurement - DC Current Measurement Range IBUS_M 0 — 3400 mA Range (Note 2 and Note 3) Reported Current Measurement Resolution IBUS_M — 13.3 — mA 1 LSB Current Measurement Accuracy — ±2 — % 200 mA < IBUS < ILIM —±2 — LSB IBUS < 200 mA Current Measurement - AC Sampling Rate — — 1.1 — ms Note 2 Conversion Time Both Channels tCONV — 2.2 — ms All registers updated in digital (Note 2) Charge Rationing - DC Accumulated Current Measurement Accuracy —— ±4.5 — % Charge Rationing - AC Current Measurement Update Time tPCYCLE —1 — s TABLE 1-2: ELECTRICAL SPECIFICATIONS (CONTINUED) Electrical Characteristics: Unless otherwise specified, VDD = 4.5V to 5.5V, VS = 2.9V to 5.5V, VPULLUP = 3V to 5.5V, TA = -40°C to 105°C. All typical values at VDD = VS = 5V, TA = 27°C. Characteristic Symbol Min. Typ. Max. Unit Conditions Note 1: This parameter is characterized, not 100% tested. 2: This parameter is ensured by design and not 100% tested. 3: The current measurement full scale range maximum value is 3.4A. However, the UCS2113 cannot report values above ILIM (if IBUS_R2MIN ILIM) or above IBUS_R2MIN (if IBUS_R2MIN > ILIM and ILIM 1.6A). |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |