SPC58EEX datasheet(145/154 Pages) STMICROELECTRONICS

145 / 154 page

DS11646 Rev 4

145/154

SPC58EEx, SPC58NEx

Revision history

153

03-April-2017

Table 9: Device consumption:

– Updated parameter “IDDHALT”

– Updated parameter “IDDSTOP”

– Changed the condition from “C” to “D” for parameter “IDD_LV_BD”

– Changed the condition from “C” to “T” for parameter “IDD_HV_BD”

– Changed from “Cc” to “SR” for parameters “ISPIKE and dl”

– Changed the condition from “P” to “T” for parameter “IDDOFF”

– Updated the max values for parameter IDD_LKG.

– Deleted parameters: IDDSTBY8, IDDSTBY128, and IDDSTBY256.

Table 11: I/O input electrical characteristics:

Added parameter “Vihcmos BD”.

Updated table footnote 1.

Table 13: WEAK/SLOW I/O output characteristics:

– For parameter “Fmax_W”, updated condition “25 pF load” to “CL=25pF”.

– For parameter “tTR_S”, changed min value (25 pF load) from “4” to “3”.

– Changed min value (50 pF load) from “6” to “5”.

Table 17: I/O consumption:

Updated all the max values of parameters, IDYN_W and IDYN_M

Table 3.8: I/O pad specification:

– Replaced all occurences of “50 pF load” with “CL=50pF”.

– Removed note “The external ballast....”.

Table 3.8.2: I/O output DC characteristics:

Added note “10%/90% is the....”

Table 15: STRONG/FAST I/O output characteristics

– Parameter “IDCMAX_S” updated:

– Condition added “VDD=5V+10%

– Condition added “VDD=3.3V+10%, Max value updated to 5.5mA

Table 19: Reset Pad state during power-up and reset:

Added this table.

Table 20: PLL0 electrical characteristics:

– For parameter “IPLL0”, classification changed from “C” to “T”.

– Footnote “Jitter values...measurement” added for parameters:

|ΔPLL0PHI0SPJ|

|ΔPLL0PHI1SPJ|

ΔPLL0LTJ

Table 21: PLL1 electrical characteristics:

– For parameter “IPLL1”, classification changed from “C” to “T”.

– Footnote “Jitter values...measurement” added for parameter “

|ΔPLL1PHI0SPJ|”

Table 22: External 40 MHz oscillator electrical specifications:

– Classification for parameters “CS_EXTAL” and “CS_EXTAL” changed from “T” to

“D”.

– Updated classification, conditions, min and max values for parameter “gm”.

– Updated parameters CS_EXTAL, and CS_XTAL.

Table 84. Document revision history (continued)

Date

Revision

Changes

SPC58EEX 数据表(PDF) 145 Page - STMicroelectronics

SPC58EEX 数据表(HTML) 145 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载