| 数据搜索系统,热门电子元器件搜索 |
|
DVR 数据表(PDF) 198 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
DVR 数据表(HTML) 198 Page - Microchip Technology |
|
198 / 416 page ![]() PIC24FJ256GA705 FAMILY DS30010118D-page 198 2016-2018 Microchip Technology Inc. REGISTER 16-7: CCPxSTATL: CCPx STATUS REGISTER LOW U-0 U-0 U-0 U-0 U-0 W-0 U-0 U-0 — — — — —ICGARM — — bit 15 bit 8 R-0 W1-0 W1-0 R/C-0 R/C-0 R/C-0 R/C-0 R/C-0 CCPTRIG TRSET TRCLR ASEVT SCEVT ICDIS ICOV ICBNE bit 7 bit 0 Legend: C = Clearable bit W = Writable bit R = Readable bit W1 = Write ‘1’ Only bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 15-11 Unimplemented: Read as ‘0’ bit 10 ICGARM: Input Capture Gate Arm bit A write of ‘1’ to this location will arm the Input Capture x module for a one-shot gating event when ICGSM<1:0> = 01 or 10; read as ‘0’. bit 9-8 Unimplemented: Read as ‘0’ bit 7 CCPTRIG: CCPx Trigger Status bit 1 = Timer has been triggered and is running 0 = Timer has not been triggered and is held in Reset bit 6 TRSET: CCPx Trigger Set Request bit Writes ‘1’ to this location to trigger the timer when TRIGEN = 1 (location always reads as ‘0’). bit 5 TRCLR: CCPx Trigger Clear Request bit Writes ‘1’ to this location to cancel the timer trigger when TRIGEN = 1 (location always reads as ‘0’). bit 4 ASEVT: CCPx Auto-Shutdown Event Status/Control bit 1 = A shutdown event is in progress; CCPx outputs are in the shutdown state 0 = CCPx outputs operate normally bit 3 SCEVT: Single Edge Compare Event Status bit 1 = A single edge compare event has occurred 0 = A single edge compare event has not occurred bit 2 ICDIS: Input Capture x Disable bit 1 = Event on Input Capture x pin (ICMx) does not generate a capture event 0 = Event on Input Capture x pin will generate a capture event bit 1 ICOV: Input Capture x Buffer Overflow Status bit 1 = The Input Capture x FIFO buffer has overflowed 0 = The Input Capture x FIFO buffer has not overflowed bit 0 ICBNE: Input Capture x Buffer Status bit 1 = Input Capture x buffer has data available 0 = Input Capture x buffer is empty |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |