STM32L082KB datasheet(81/132 Pages) STMICROELECTRONICS

81 / 132 page

DS10688 Rev 7

81/132

STM32L082xx

Electrical characteristics

109

6.3.10

EMC characteristics

Susceptibility tests are performed on a sample basis during device characterization.

Functional EMS (electromagnetic susceptibility)

While a simple application is executed on the device (toggling 2 LEDs through I/O ports).

the device is stressed by two electromagnetic events until a failure occurs. The failure is

indicated by the LEDs:

•

Electrostatic discharge (ESD) (positive and negative) is applied to all device pins until

a functional disturbance occurs. This test is compliant with the IEC 61000-4-2 standard.

•

FTB: A Burst of Fast Transient voltage (positive and negative) is applied to VDD and

VSS through a 100 pF capacitor, until a functional disturbance occurs. This test is

compliant with the IEC 61000-4-4 standard.

A device reset allows normal operations to be resumed.

The test results are given in Table 52. They are based on the EMS levels and classes

defined in the application note AN1709 “EMC design guide for STM8, STM32 and legacy

MCUs”.

tRET(2)

Data retention (program memory) after

10 kcycles at TA = 85 °C

TRET = +85 °C

years

Data retention (EEPROM data memory)

after 100 kcycles at TA = 85 °C

Data retention (program memory) after

10 kcycles at TA = 105 °C

TRET = +105 °C

Data retention (EEPROM data memory)

after 100 kcycles at TA = 105 °C

Data retention (program memory) after

200 cycles at TA = 125 °C

TRET = +125 °C

Data retention (EEPROM data memory)

after 2 kcycles at TA = 125 °C

1. Guaranteed by characterization results.

2. Characterization is done according to JEDEC JESD22-A117.

Table 51. Flash memory and data EEPROM endurance and retention (continued)

Symbol

Parameter

Conditions

Value

Unit

Min(1)

Table 52. EMS characteristics

Symbol

Parameter

Conditions

Level/

Class

VFESD

Voltage limits to be applied on any I/O pin to

induce a functional disturbance

VDD = 3.3 V, TA = +25 °C,

fHCLK = 32 MHz

conforms to IEC 61000-4-2

VEFTB

Fast transient voltage burst limits to be

applied through 100 pF on VDD and VSS

pins to induce a functional disturbance

VDD = 3.3 V, TA = +25 °C,

fHCLK = 32 MHz

conforms to IEC 61000-4-4

STM32L082KB 数据表(PDF) 81 Page - STMicroelectronics

STM32L082KB 数据表(HTML) 81 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

STM32L082KB 数据表(PDF) 81 Page - STMicroelectronics

STM32L082KB 数据表(HTML) 81 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载