STM32L082KB datasheet(84/132 Pages) STMICROELECTRONICS

84 / 132 page

Electrical characteristics

STM32L082xx

84/132

DS10688 Rev 7

6.3.12

I/O current injection characteristics

As a general rule, current injection to the I/O pins, due to external voltage below VSS or

above VDD (for standard pins) should be avoided during normal product operation.

However, in order to give an indication of the robustness of the microcontroller in cases

when abnormal injection accidentally happens, susceptibility tests are performed on a

sample basis during device characterization.

Functional susceptibility to I/O current injection

While a simple application is executed on the device, the device is stressed by injecting

current into the I/O pins programmed in floating input mode. While current is injected into

the I/O pin, one at a time, the device is checked for functional failures.

The failure is indicated by an out of range parameter: ADC error above a certain limit (higher

than 5 LSB TUE), out of conventional limits of induced leakage current on adjacent pins (out

of –5 µA/+0 µA range), or other functional failure (for example reset occurrence oscillator

frequency deviation).

The test results are given in the Table 56.

Table 56. I/O current injection susceptibility

Symbol

Description

Functional susceptibility

Unit

Negative

injection

Positive

injection

IINJ

Injected current on BOOT0

-0

NA(1)

1. Current injection is not possible.

Injected current on PA0, PA4, PA5, PC15,

PH0 and PH1

-5

Injected current on any other FT, FTf pins

-5 (2)

2. It is recommended to add a Schottky diode (pin to ground) to analog pins which may potentially inject

negative currents.

NA(1)

Injected current on any other pins

-5 (2)

STM32L082KB 数据表(PDF) 84 Page - STMicroelectronics

STM32L082KB 数据表(HTML) 84 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载