| 数据搜索系统,热门电子元器件搜索 |
|
STM32H757AI 数据表(PDF) 108 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32H757AI 数据表(HTML) 108 Page - STMicroelectronics |
|
108 / 251 page ![]() Electrical characteristics STM32H757xI 108/251 DS12931 Rev 1 4. To sustain a voltage higher than 4V the internal pull-up/pull-down resistors must be disabled. Table 21. Current characteristics Symbols Ratings Max Unit ΣIVDD Total current into sum of all VDD power lines (source)(1) 1. All main power (VDD, VDDA, VDD33USB) and ground (VSS, VSSA) pins must always be connected to the external power supplies, in the permitted range. 620 mA ΣIVSS Total current out of sum of all VSS ground lines (sink)(1) 620 IVDD Maximum current into each VDD power pin (source)(1) 100 IVSS Maximum current out of each VSS ground pin (sink)(1) 100 IIO Output current sunk by any I/O and control pin 20 ΣI(PIN) Total output current sunk by sum of all I/Os and control pins(2) 2. This current consumption must be correctly distributed over all I/Os and control pins. The total output current must not be sunk/sourced between two consecutive power supply pins referring to high pin count QFP packages. 140 Total output current sourced by sum of all I/Os and control pins(2) 140 IINJ(PIN)(3)(4) 3. Positive injection is not possible on these I/Os and does not occur for input voltages lower than the specified maximum value. 4. A positive injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS. IINJ(PIN) must never be exceeded. Refer also to Table 20: Voltage characteristics for the maximum allowed input voltage values. Injected current on FT_xxx, TT_xx, RST and B pins except PA4, PA5 −5/+0 Injected current on PA4, PA5 −0/0 ΣIINJ(PIN) Total injected current (sum of all I/Os and control pins)(5) 5. When several inputs are submitted to a current injection, the maximum ∑IINJ(PIN) is the absolute sum of the positive and negative injected currents (instantaneous values). ±25 Table 22. Thermal characteristics Symbol Ratings Value Unit TSTG Storage temperature range − 65 to +150 °C TJ Maximum junction temperature 125 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |