| 数据搜索系统,热门电子元器件搜索 |
|
SC16C852LIB 数据表(PDF) 1 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
SC16C852LIB 数据表(HTML) 1 Page - NXP Semiconductors |
|
1 / 60 page ![]() 1. General description The SC16C852L is a 1.8 V, low power, dual channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s. The SC16C852L is pin compatible with the SC16C652B. SC16C852L can be programmed to operate in extended mode (see Section 6.2) where additional advanced UART features are available. The SC16C852L UART provides enhanced UART functions with 128-byte FIFOs, modem control interface, DMA mode data transfer, and IrDA encoder/decoder. The DMA mode data transfer is controlled by the FIFO trigger levels and the TXRDY and RXRDY signals. On-board status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by software to meet specific user requirements. An internal loopback capability allows on-board diagnostics. Independent programmable baud rate generators are provided to select transmit and receive baud rates. The SC16C852L with Intel (16 mode) or Motorola (68 mode) bus host interface operates at 1.8 V and is available in plastic LQFP48 and very small (Micro-UART) HVQFN32 packages. 2. Features I Dual channel high performance UART I Intel or Motorola bus interface selectable using 16/68 pin I 1.8 V operation I Up to 5 Mbit/s data rate I 128-byte transmit FIFO to reduce the bandwidth requirement of the external CPU I 128-byte receive FIFO with error flags to reduce the bandwidth requirement of the external CPU I 128 programmable Receive and Transmit FIFO interrupt trigger levels I 128 Receive and Transmit FIFO reporting levels (level counters) I Automatic software (Xon/Xoff) and hardware (RTS/CTS or DTR/DSR) flow control I Industrial temperature range (−40 °C to +85 °C) I Pin, function, and software compatible to SC16C652B in LQFP48 package I 128 hardware and software trigger levels I Automatic 9-bit mode (RS-485) address detection I Automatic RS-485 driver turn-around with programmable delay I Dual channel concurrent write I UART software reset SC16C852L 1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode bus interface Rev. 02 — 25 January 2007 Product data sheet |
类似零件编号 - SC16C852LIB |
|
类似说明 - SC16C852LIB |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |