| 数据搜索系统,热门电子元器件搜索 |
|
DM9013 数据表(PDF) 46 Page - Davicom Semiconductor, Inc. |
|
|
|||||||||||||||||||||||||||||
DM9013 数据表(HTML) 46 Page - Davicom Semiconductor, Inc. |
|
46 / 75 page ![]() DM9013 3-port switch with Processor Interface 46 Preliminary datasheet DM9013-15-DS-P03 April 9, 2009 8.5 Auto-negotiation Advertisement Register (ANAR) – 04H This register contains the advertised abilities of this DM9013 device as they will be transmitted to its link partner during Auto-negotiation. Bit Bit Name Default Description 15 NP 0,RO/P Next page Indication 0 = No next page available 1 = Next page available The DM9013 has no next page, so this bit is permanently set to 0 14 ACK 0,RO Acknowledge 0 = Not acknowledged 1 = Link partner ability data reception acknowledged The DM9013's auto-negotiation state machine will automatically control this bit in the outgoing FLP bursts and set it at the appropriate time during the auto-negotiation process. Software should not attempt to write to this bit. 13 RF 0, RW Remote Fault 0 = No fault detected 1 = Local device senses a fault condition 12-11 Reserved X, RW Reserved Write as 0, ignore on read 10 FCS 1, RW Flow Control Support 0 = Controller chip doesn’t support flow control ability 1 = Controller chip supports flow control ability 9 T4 0, RO/P 100BASE-T4 Support 0 = 100BASE-T4 is not supported 1 = 100BASE-T4 is supported by the local device The DM9013 does not support 100BASE-T4 so this bit is permanently set to 0 8 TX_FDX 1, RW 100BASE-TX Full Duplex Support 0 = 100BASE-TX full duplex is not supported 1 = 100BASE-TX full duplex is supported by the local device 7 TX_HDX 1, RW 100BASE-TX Support 0 = 100BASE-TX half duplex is not supported 1 = 100BASE-TX half duplex is supported by the local device 6 10_FDX 1, RW 10BASE-T Full Duplex Support 0 = 10BASE-T full duplex is not supported 1 = 10BASE-T full duplex is supported by the local device 5 10_HDX 1, RW 10BASE-T Support 0 = 10BASE-T half duplex is not supported 1 = 10BASE-T half duplex is supported by the local device 4-0 Selector <00001>, RW Protocol Selection Bits These bits contain the binary encoded protocol selector supported by this node <00001> indicates that this device supports IEEE 802.3 CSMA/CD |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |