| 数据搜索系统,热门电子元器件搜索 |
|
CS4294/CS4298 数据表(PDF) 44 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS4294/CS4298 数据表(HTML) 44 Page - Cirrus Logic |
|
44 / 66 page ![]() CS4202 44 DS549PP2 6. SONY/PHILIPS DIGITAL INTERFACE (S/PDIF) The S/PDIF digital output is used to interface the CS4202 to consumer audio equipment external to the PC. This output provides an interface for stor- ing digital audio data or playing digital audio data to digital speakers. Figure 15 illustrates the circuits necessary for implementing the IEC-958 optical or consumer interface. For further information on S/PDIF operation see application note AN22: Over- view of Digital Audio Interface Data Structures [3]. For further information on S/PDIF recommended transformers see application note AN134: AES and S/PDIF Recommended Transformers [4]. 7. EXCLUSIVE FUNCTIONS Some of the digital pins on the CS4202 have mul- tiplexed functionality. These functions are mutual- ly exclusive and cannot be requested at the same time. The following pairs of functions are mutually exclusive: • GPIO and Serial Data Port (GPIO0 pin is shared with LRCLK pin, GPIO1 pin is shared with SDOUT pin, and GPIO4 pin is shared with SDO2 pin) • EAPD and Serial Data Port Serial Clock (EAPD pin is shared with SCLK pin) Use of the GPIO0/LRCLK, GPIO1/SDOUT, and GPIO4/SDO2 pins for serial data port has priority over their GPIO functionality. There is no priority assigned to the other exclusive function. A function currently in use must be disabled or powered down before the corresponding exclusive function can be enabled. The following control bits for these func- tions will behave differently than normal bits: the EAPD bit in the Powerdown Control/Status Regis- ter (Index 26h), the GC[4,1:0] bits in the GPIO Pin Configuration Register (Index 4Ch), and the SDO2, and SDSC bits in the Serial Port Control Register (Index 6Ah). These bits can become read-only bits if they control a feature that is cur- rently unavailable because the corresponding ex- clusive feature is already in use, or the corresponding master control for this feature is not set. 1 2 3 4 5 6 0.1 µF R 2 R 1 J1 DGND DVdd R 1 R 2 SPDIF_OUT TOTX-173 SPDIF_OUT +5V_PCI DGND 8.2 k Ω DGND DGND 3.3V 247.5 Ω 107.6 Ω 5V 375 Ω 93.75 Ω T 1 Figure 15. S/PDIF Output |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |