PM0215 datasheet(56/91 Pages) STMICROELECTRONICS

56 / 91 page

The STM32 Cortex-M0 instruction set

PM0215

56/91

Doc ID 022979 Rev 1

3.5.7

REV, REV16, and REVSH

Reverse bytes and reverse bits.

Syntax

op Rd, Rn

where:

●

‘op’ is one of:

REV: Reverse byte order in a word

REV16: Reverse byte order in each halfword independently

REVSH: Reverse byte order in the bottom halfword, and sign extends to 32 bits

●

‘Rd’ is the destination register

●

‘Rn’ is the register holding the operand

Operation

Use these instructions to change endianness of data:

●

REV: Converts either:

–

32-bit big-endian data into little-endian data or

–

32-bit little-endian data into big-endian data.

●

REV16: Converts either:

–

2 packed 16-bit big-endian data into little-endian data or

–

2 packed 16-bit little-endian data into big-endian data.

●

REVSH: Converts either:

–

16-bit signed big-endian data into 32-bit signed little-endian data or

–

16-bit signed little-endian data into 32-bit signed big-endian data

Restrictions

In these instructions, Rd, and Rn must only specify R0-R7.

Condition flags

These instructions do not change the flags.

Examples

REV R3, R7

; reverse byte order of value in R7 and write it to R3

REV16 R0, R0 ; reverse byte order of each 16-bit halfword in R0

REVSH R0, R5 ; reverse Signed Halfword

PM0215 数据表(PDF) 56 Page - STMicroelectronics

PM0215 数据表(HTML) 56 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91

数据表下载