STM32F756VG datasheet(97/228 Pages) STMICROELECTRONICS

97 / 228 page

DocID027589 Rev 4

97/228

STM32F756xx

Electrical characteristics

196

5.1.7

Current consumption measurement

Figure 23. Current consumption measurement scheme

5.2

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 14: Voltage characteristics,

Table 15: Current characteristics, and Table 16: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Table 14. Voltage characteristics

Symbol

Ratings

Min

Max

Unit

VDD–VSS

External main supply voltage (including VDDA, VDD,

VBAT and VDDUSB) (1)

1. All main power (VDD, VDDA, VDDUSB) and ground (VSS, VSSA) pins must always be connected to the

external power supply, in the permitted range.

− 0.3

4.0

VIN

Input voltage on FT pins(2)

2. VIN maximum value must always be respected. Refer to Table 15 for the values of the maximum allowed

injected current.

VSS − 0.3 VDD+4.0

Input voltage on TTa pins

VSS − 0.3

4.0

Input voltage on any other pin

VSS − 0.3

4.0

Input voltage on BOOT pin

VSS

9.0

ΔVDDx|

Variations between different VDD power pins

|VSSX −VSS|

Variations between all the different ground pins(3)

3. Include VREF- pin.

-50

VESD(HBM)

Electrostatic discharge voltage (human body model)

see Section 5.3.15:

Absolute maximum

ratings (electrical

sensitivity)

STM32F756VG 数据表(PDF) 97 Page - STMicroelectronics

STM32F756VG 数据表(HTML) 97 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载