STM32F756VG datasheet(12/228 Pages) STMICROELECTRONICS

12 / 228 page

Description

STM32F756xx

12/228

DocID027589 Rev 4

Description

The STM32F756xx devices are based on the high-performance ARM® Cortex®-M7 32-bit

RISC core operating at up to 216 MHz frequency. The Cortex®-M7 core features a single

floating point unit (SFPU) precision which supports all ARM® single-precision data-

processing instructions and data types. It also implements a full set of DSP instructions and

a memory protection unit (MPU) which enhances the application security.

The STM32F756xx devices incorporate high-speed embedded memories with a Flash

memory up to 1 Mbyte, 320 Kbytes of SRAM (including 64 Kbytes of Data TCM RAM for

critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines),

4 Kbytes of backup SRAM available in the lowest power modes, and an extensive range of

enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-

AHB bus matrix and a multi layer AXI interconnect supporting internal and external

memories access.

All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, thirteen general-

purpose 16-bit timers including two PWM timers for motor control and one low-power timer

available in Stop mode, two general-purpose 32-bit timers, a true random number generator

(RNG), and a cryptographic acceleration cell. They also feature standard and advanced

communication interfaces.

•

Up to four I2Cs

•

Six SPIs, three I2Ss in duplex mode. To achieve the audio class accuracy, the I2S

peripherals can be clocked via a dedicated internal audio PLL or via an external clock

to allow synchronization.

•

Four USARTs plus four UARTs

•

An USB OTG full-speed and a USB OTG high-speed with full-speed capability (with the

ULPI),

•

Two CANs

•

Two SAI serial audio interfaces

•

An SDMMC host interface

•

Ethernet and camera interfaces

•

LCD-TFT display controller

•

Chrom-ART Accelerator™

•

SPDIFRX interface

•

HDMI-CEC

Advanced peripherals include an SDMMC interface, a flexible memory control (FMC)

interface, a Quad-SPI Flash memory interface, a camera interface for CMOS sensors and a

cryptographic acceleration cell. Refer to Table 2: STM32F756xx features and peripheral

counts for the list of peripherals available on each part number.

The STM32F756xx devices operate in the –40 to +105 °C temperature range from a 1.7 to

3.6 V power supply. A dedicated supply input for USB (OTG_FS and OTG_HS) is available

on all the packages except LQFP100 for a greater power supply choice.

The supply voltage can drop to 1.7 V with the use of an external power supply supervisor

(refer to Section 2.17.2: Internal reset OFF). A comprehensive set of power-saving mode

allows the design of low-power applications.

The STM32F756xx devices offer devices in 8 packages ranging from 100 pins to 216 pins.

The set of included peripherals changes with the device chosen.

STM32F756VG 数据表(PDF) 12 Page - STMicroelectronics

STM32F756VG 数据表(HTML) 12 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载