STM32F756VG datasheet(30/228 Pages) STMICROELECTRONICS

30 / 228 page

Functional overview

STM32F756xx

30/228

DocID027589 Rev 4

2.18.3

Regulator ON/OFF and internal reset ON/OFF availability

2.19

Real-time clock (RTC), backup SRAM and backup registers

The RTC is an independent BCD timer/counter. It supports the following features:

•

Calendar with subsecond, seconds, minutes, hours (12 or 24 format), week day, date,

month, year, in BCD (binary-coded decimal) format.

•

Automatic correction for 28, 29 (leap year), 30, and 31 days of the month.

•

Two programmable alarms.

•

On-the-fly correction from 1 to 32767 RTC clock pulses. This can be used to

synchronize it with a master clock.

•

Reference clock detection: a more precise second source clock (50 or 60 Hz) can be

used to enhance the calendar precision.

•

Digital calibration circuit with 0.95 ppm resolution, to compensate for quartz crystal

inaccuracy.

•

Three anti-tamper detection pins with programmable filter.

•

Timestamp feature which can be used to save the calendar content. This function can

be triggered by an event on the timestamp pin, or by a tamper event, or by a switch to

VBAT mode.

•

17-bit auto-reload wakeup timer (WUT) for periodic events with programmable

resolution and period.

The RTC and the 32 backup registers are supplied through a switch that takes power either

from the VDD supply when present or from the VBAT pin.

The backup registers are 32-bit registers used to store 128 bytes of user application data

when VDD power is not present. They are not reset by a system or power reset, or when the

device wakes up from Standby mode.

The RTC clock sources can be:

•

A 32.768 kHz external crystal (LSE)

•

An external resonator or oscillator(LSE)

•

The internal low-power RC oscillator (LSI, with typical frequency of 32 kHz)

•

The high-speed external clock (HSE) divided by 32.

Table 4. Regulator ON/OFF and internal reset ON/OFF availability

Package

Regulator ON

Regulator OFF

Internal reset ON Internal reset OFF

LQFP100

Yes

LQFP144,

LQFP208

Yes

PDR_ON set to

VDD

Yes

PDR_ON set to

VSS

TFBGA100,

LQFP176,

WLCSP143,

UFBGA176,

TFBGA216

Yes

BYPASS_REG set

to VSS

Yes

BYPASS_REG set

to VDD

STM32F756VG 数据表(PDF) 30 Page - STMicroelectronics

STM32F756VG 数据表(HTML) 30 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载