| 数据搜索系统,热门电子元器件搜索 |
|
STS1TX 数据表(PDF) 40 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STS1TX 数据表(HTML) 40 Page - STMicroelectronics |
|
40 / 70 page ![]() Transmission and reception STS1TX 40/70 DocID025109 Rev 1 OOK and ASK If MOD_TYPE = 2 and power ramping is enabled, then ASK is used; otherwise, if MOD_TYPE = 2 and power ramping is disabled, then OOK is used. When OOK is selected, a bit '1' is transmitted with the power specified by PA_POWER[PA_LEVEL_MAX_INDEX], a bit '0' is transmitted with the power specified by PA_POWER[0](normally set to PA off). When ASK is selected, a bit '1' is transmitted with a power ramp increasing from PA_POWER[0] to PA_POWER[PA_LEVEL_MAX_INDEX], a bit '0' is transmitted with a power ramp decreasing from PA_POWER[PA_LEVEL_MAX_INDEX] to PA_POWER[0]. The duration of each power step is 1/8 of the symbol time. If more '1's are transmitted consecutively, the PA power remains at PA_POWER[PA_LEVEL_MAX_INDEX] for all '1's following the first one; If more '0's are transmitted consecutively, the PA power remains at PA_POWER[0] for all '0's following the first one. CW mode For test and measurement purposes the device can be programmed to generate a continuous wave carrier without any modulation by setting the CW field of the MOD0 register. In transmission, a TXSOURCE like PN9 should be configured to keep the transmitter in TX state for an undefined period of time. 9.3.1 Data rate The data rate is controlled by the MOD0 and MOD1 registers according to the following formula: Equation 8 where: • DATARATE_M is an 8-bit integer ranging from 0 to 255 • DATARATE_E is a 4-bit integer ranging from 0 to 15 • fclk is the digital clock frequency (typically 26 MHz). The minimum data rate at fclk = 26 MHz is about 25 Hz; the maximum data rate is about 1.6 MHz. Be advised that performance for such values is not guaranteed. 9.4 Data coding and integrity check process 9.4.1 FEC The device provides hardware support for error correction and detection. Error correction can be either enabled or disabled according to link reliability and power consumption needs. Convolutional coding with a rate=½ and k=4 is applied on the payload and CRC before transmission (poly [13,17]). DataRate fclk 256 DATA_RATE_M + () 2 DATARATE_E ⋅ 2 28 ------------------------------------------------------------------------------------------------------- ⋅ = |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |