CS53L21 datasheet(40/66 Pages) CIRRUS

40 / 66 page

DS700PP1

CS53L21

6. REGISTER DESCRIPTION

All registers are read/write except for the chip I.D. and Revision Register and Interrupt Status Register which are

read only. See the following bit definition tables for bit assignment information. The default state of each bit after a

power-up sequence or reset is listed in each bit description.

All “Reserved” registers must maintain their default state.

6.1

Chip I.D. and Revision Register (Address 01h) (Read Only)

Chip I.D. (Chip_ID[4:0])

Default: 11011

Function:

I.D. code for the CS53L21. Permanently set to 11011.

Chip Revision (Rev_ID[2:0])

Default: 001

Function:

CS53L21 revision level. Revision B is coded as 001. Revision A is coded as 000.

6.2

Power Control 1 (Address 02h)

Notes:

1. To activate the power-down sequence for individual channels (A or B,) both channels must first be pow-

ered down either by enabling the PDN bit or by enabling the power-down bits for both channels. En-

abling the power-down bit on an individual channel basis after the A/D has fully powered up will mute

the selected channel without achieving any power savings.

2. Reserved bits 5 and 6 should always be set “high” by the user to minimize power consumption during

normal operation.

Recommended channel power-down sequence: 1.) Enable the PDN bit, 2.) enable power-down for the se-

lect channels, 3.) disable the PDN bit.

543

Chip_ID4

Chip_ID3

Chip_ID2

Chip_ID1

Chip_ID0

Rev_ID2

Rev_ID1

Rev_ID0

543

Reserved

PDN_PGAB

PDN_PGAA

PDN_ADCB

PDN_ADCA

PDN

CS53L21 数据表(PDF) 40 Page - Cirrus Logic

CS53L21 数据表(HTML) 40 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

数据表下载